551403
57
Zoom out
Zoom in
Previous page
1/76
Next page
Installation surface
A concrete floor is the most suitable
installation surface. It is far less prone
to vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
Please note the following:
^
The machine must be level and
securely positioned.
^
To avoid vibrations during spinning
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
^ We recommend the use of a plywood
base at least 59x52x3 cm. The base
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for pipes and
cables beforehand!
The most stable part of the floor is
usually in the corner.
,
If the machine is installed on a
raised plinth, it has to be secured
against slippage during spin using
retaining clips (available from the
Miele Spare Parts Dept). Otherwise
there is the danger of the machine
moving about.
Installation
Lift the machine from its packaging
base and move it to its site. Please note
the following:
^
Do not lift the machine by the drum
door.
,
Ensure that the machine feet and
the floor area are dry to prevent the
machine from slipping during the
spin cycle.
Installation and connection
57
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele WT945 S WPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele WT945 S WPS in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info