301533
46
Zoom out
Zoom in
Previous page
1/76
Next page
A fault indicator lamp comes on but the wash programme
continues as normal.
Problem Possible cause Remedy
The Water inlet/drain
indicator lamp flashes
during a programme,
but the wash
programme has run
normally.
There is a blockage in
the water inlet.
Check whether:
the stopcock is opened
wide enough.
the inlet hose is kinked.
The water pressure is
too low.
In this case, call the Miele
Service Dept.
The filter in the water
inlet hose is dirty.
Clean the filter as described
in "Cleaning and care".
The Water inlet/drain
indicator lamp is
flashing.
There is a blockage in
the water outlet.
Clean the fluff filter and the
drain pump.
Has the drain hose been
fitted too high? Max.
delivery head, 1.00 m
The Drying overload
indicator lamp is
flashing towards the
end of a drying
programme.
The load was too
large.
In future do not exceed the
maximum load. This way
you will avoid:
a) Creasing of
delicate textiles
b) Uneven drying
results / damp laundry
Complete the drying process
using a TIMED DRYING
programme.
The Anti-crease/Finish
indicator lamp is
flashing and the
locked indicator lamp
is on.
The selected
programme was
altered with the safety
lock activated.
See section "Safety Lock".
Problem solving guide
46
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele wt 945s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele wt 945s in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele wt 945s

Miele wt 945s User Manual - German - 76 pages

Miele wt 945s User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info