301785
58
Zoom out
Zoom in
Previous page
1/88
Next page
Problems with the load size indicator
Problem Possible cause Remedy
The display indicates
a load of <25% or no
load size is indicated
when the drum is full.
Laundry was left in
the drum when the
machine was
switched off. This
has decalibrated the
sensor from the zero
setting.
To recalibrate the sensor to the
zero setting:
Remove the laundry from the
drum.
Switch off the machine and
leave the door open.
Switch on the machine.
Turn the programme selector
to Cottons.
Press and hold the Load % /
Detergent % button in until the
following message appears in
the display: Zero setting OK
The load sensor has
to be recalibrated to
zero after running
the Rinse out fluff
programme.
The display indicates
a load of 25%, 50%,
75% or 100% when
the drum is empty.
The load size sensor
has been
decalibrated from
the zero setting.
Rotate the drum once. If the
display still indicates a load of
25%, 50%, 75% or 100%,
recalibrate the sensor to zero
again (see above section).
The following will
appear in the display:
Zero setting not
possible. Open the
door
The drum door is
closed.
Open the drum door.
Recalibrate the sensor to zero
again.
The drying
programme stops and
the following
message appears in
the display:
Check load
There is very little or no
laundry in the drum. Drying
individual garments or items
which are already dry can
also cause the programme
to be cancelled.
In future use a timed
drying programme or the
Warm air timed drying
programme for individual
items.
At the end of a drying
programme the
following message
appears in the
display:
Check load
The machine has recognised
an overload.
In future do not exceed
the maximum load.
Problem solving guide
58
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele wt 2780 wpm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele wt 2780 wpm in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele wt 2780 wpm

Miele wt 2780 wpm User Manual - German - 84 pages

Miele wt 2780 wpm User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info