301611
7
Zoom out
Zoom in
Previous page
1/80
Next page
Technical safety
~
Before setting up the washer-dryer,
check it for any externally visible
damage.
Do not install or use a damaged
machine.
~
Before connecting the washer-dryer,
ensure that the connection data on the
data plate (voltage and connected
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
~
The electrical safety of this
washer-dryer can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and where
there is any doubt the household wiring
system should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system (e.g. electric shock).
~
Do not connect the machine to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the washer-dryer
(e.g. danger of overheating).
~
Unauthorised repairs could result in
unforeseen dangers for the user, for
which the Miele cannot accept liability.
Repairs should only be undertaken by a
Miele approved service technician.
Ensure current is not supplied to the
machine until after maintenance or
repair work has been carried out.
~
In the event of a fault or for cleaning
purposes, the washer-dryer is only
completely isolated from the electricity
supply when:
it is switched off at the wall socket
and the plug is withdrawn, or
it is switched off at the mains, or
the mains fuse is disconnected, or
the screw-out fuse is removed (in
countries where this is applicable).
~
The Miele “Water protection system”
protects from water damage provided
the following conditions have been met:
the machine is correctly plumbed in
and connected to the electricity
supply.
if a fault has been identified, the
machine must be examined by a
competent person before further use,
and repaired if necessary.
~
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
~
If the connection cable is faulty it
must only be replaced by a Miele
approved service technician to protect
the user from danger.
Warning and safety instructions
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele wt 2670 wpm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele wt 2670 wpm in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele wt 2670 wpm

Miele wt 2670 wpm User Manual - German - 80 pages

Miele wt 2670 wpm User Manual - Dutch - 84 pages

Miele wt 2670 wpm User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info