529105
20
Zoom out
Zoom in
Previous page
1/52
Next page
Problem solving guide
First position the screwdriver in the opening,
push in and hold firm.
Press against the door handle with your right
hand, and then pull on the door handle to
open the door.
- Never use force to open the door. -
Take out the laundry.
Fault messages
Repairs to machines should only be under-
taken by a suitably qualified service engineer
to ensure safety. Unauthorised repairs could
be dangerous.
Faults that occur before or after the start of a
programme are displayed in a flashing display.
When power is restored press the Start
button X.
This fault message can also indicate that the
winding protection of the drive motor has over-
heated. Allow the motor to cool down.
Should the water inlet become blocked,
"Water inlet fault" will be displayed and the
programme terminated.
Open water stopcock and press the Start
button X.
Check the drainage system on site and press
the Start button X. A defective drain valve
should only be repaired by an authorised
service engineer.
Call the Service department.
Call the Service department.
Call the Service department.
Call the Service department.
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
THROUGH POWER CUT
Please press the Start button.
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
WATER INLET FAULT
Open water stopcock and press Start button.
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
HEATING SYSTEM FAULT
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
HEATING SYSTEM FAULT
Cut-out of heating sensor 1.
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
HEATING SYSTEM FAULT
Short circuit on heater sensor 1
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
DRAIN FAULT
Clean drain system and press Start button.
PROGRAMME 1 Universal 50°C
PROGRAMME STOP
DRIVE SYSTEM FAULT
Multiplug drive variants lacking.
«M.-Nr. 06 411 840 - GB - » 20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele WS 5240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele WS 5240 in the language / languages: English, German as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info