651861
72
Zoom out
Zoom in
Previous page
1/112
Next page
Problem solving guide
72
A message appears in the display at the end of the programme
Message Cause and remedy
Intensive flow: Clean
the filter and jets or
remove foreign ob-
jects from the pump
housing.
The pumps are dirty.
Clean the pumps as described in "Problem solving
guide - Opening the door in the event of a blocked
drain outlet and/or power failure"
Start the programme again after cleaning the
pumps.
The jet in the top of the door ring is blocked with fluff.
Remove the fluff with your finger. Do not use any
sharp or pointed tools to do this.
Start the programme again after cleaning the jet.
If the fault message appears again, contact the Ser-
vice Department. The washing machine can still be
used but with reduced functionality.
Align the washing
machine
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
Check whether the washing machine is aligned
correctly as described in "Installation and connec-
tion - Levelling the machine".
Check whether the maximum delivery height of 1
m has been exceeded.
If the fault message appears again, contact the Ser-
vice Department. The washing machine can still be
used but with reduced functionality.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele WKR571 WPS PowerWash 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele WKR571 WPS PowerWash 2.0 in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info