24166
32
Zoom out
Zoom in
Previous page
1/48
Next page
Installation surface
A concrete floor is the most suitable
surface for a washing machine. Con
-
crete floors are less prone to vibration
during the spin cycle than wooden
floors.
Please note the following points:
^
The machine must be level and se
-
curely positioned.
^
To avoid vibration during spinning,
the machine should not be installed
on soft floor coverings.
^ If installation must be on a wooden
joist floor, we recommend the use of
a plywood base at least 1
1
/
4
" thick by
23
5
/
8
" X 23
5
/
8
" wide (30mm X
600mm X 600mm). Ideally the base
should be large enough to span sev-
eral joists and should be anchored to
the joists and not just the floorboards.
^ As a general rule, we recommend the
installation of the machine (or
washer/dryer stack) in the corner of a
room where the stability of the floor is
greatest.
^
If the machine is installed on a raised
platform, it should be secured using
retaining clips (available from the
Miele Technical Service Dept.). If in
-
stalled on a masonary or concrete
base, the base should be provided
with a rim
1
/
2
" to
3
/
4
" (12-20 mm) high.
Installation
Lift the machine from its shipping pallet
and move it to the installation site.
Please note:
^
Do not lift the machine by the drum
door.
^
Ensure that the machine feet and the
floor are dry to prevent slippage dur
-
ing the spin cycle.
Removing the shipping struts
1. Turn the left shipping strut 90° coun
-
terclockwise.
INSTALLATION INSTRUCTIONS
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele W1930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele W1930 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info