551386
41
Zoom out
Zoom in
Previous page
1/56
Next page
Fitting the front panel
The front of this appliance can be fitted
with a door panel to match surrounding
units. If the unit is fitted in a MIELE KIT-
CHEN, a door panel with the appropri-
ate dimensions and the necessary
holes pre-drilled can be provided.
If the kitchen is from a manufacturer
other than Miele, it is recommended
that the panel be cut to size and
holes drilled by a specialist, accord-
ing to Miele specifications.
Front panel dimensions:
Height: . . . . . . . . 570 mm (+10/–25mm)
Width:. . . . . . . . . . . . . . . 588 - 596 mm
Thickness: . max 19 mm (at the edges)
The template provided serves to locate
and drill the fixing holes for non-Miele
kitchens.
Place the template on the lower
edge of the rear of the door panel.
There are four short parallel marks in
all four corners of the template.
Use these short markings to position
the template correctly.
Example:
On a 594 mm wide panel the 2nd mark-
ing from the centre must line up with
the left and right hand outer edge of
the door panel.
Affix the template to the panel using
adhesive tape.
There are various ways of fixing the
panel in position.
Example 1:
Drill all fixing holes for the inner door
panel to the specified depth. On
chipboard fronts: inject silicon seal-
ant (supplied) into the (= Ø 10 mm)
free holes.
Unscrew the lower screws on the top
hinges on both the left and right
hand side of the door (see illustra-
tion.).
Screw the front panel on through drill
holes 1 and 2 of the inner door panel
(see template) - do not overtighten,
(screws are supplied).
Align the front panel.
Tighten the screws
Installation
41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele W 931i WPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele W 931i WPS in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info