551385
30
Zoom out
Zoom in
Previous page
1/48
Next page
What to do if, . . . Cause . . . Remedy . . .
. . . one of the following
lights is flashing:
“Soak / Pre-wash”
“Main wash”
“Rinses 1 - 2”
“Rinse 3”
There is a fault. Start the programme again. If
the light starts flashing again,
call the Service dept.
. . . the “Rinse hold” light
flashes?
The spin speed selector has
been set to “Rinse hold”.
Select a spin speed setting (or
Without final spin).
. . . the “Drain/Final spin”
light is flashing:
The final spin has not taken
place The machine detected an
imbalance.
Loosen the laundry load.
Turn the programme selector
to “Spin”.
The spin speed appropriate
for the programme should be
selected.
. . . the “ON” indicator light
is flashing:
Programme locking is activated.
There was an attempt to alter
the programme.
Reselect the programme
originally chosen.
. . . the washing is not spun
satisfactorily:
The spin speed selected was
too low.
Select a higher spin speed next
time.
The load was not distributed
sufficiently evenly in the drum.
Laundry was spun at a reduced
speed to protect the machine.
Mix large and small items in a
load to avoid imbalance.
The fluff filter is clogged. Clean the fluff filter.
. . . the machine shakes
during the spin cycle:
The four feet are not resting
evenly on the floor.
Level the machine (See Section
on Installation).
. . . the light rings do not il-
luminate:
The bulb has gone.
(This in no way affects the
machine’s function).
Changing the bulb requires a
Service call.
. . . in spite of adequate
water supply the water flows
slowly into the machine:
The filter in the water inlet
system is blocked.
Clean the water inlet filter.
Problem solving guide
30
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele W 906 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele W 906 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info