551373
40
Zoom out
Zoom in
Previous page
1/68
Next page
The following fault messages appear in the display and the
programme stops
Fault message Possible cause Remedy A
;
Drain
fault
The water outlet is
blocked or restricted.
The drain hose has
been fixed too high.
Clean the drain filter and
the drain pump.
The maximum delivery head
is1m.
;
Water inlet
fault
The water inlet is blocked
or restricted.
Check whether
the stopcock is opened
properly.
the inlet hose is kinked.
the water pressure is too
low.
The filter in the water inlet
hose is dirty.
Clean the filter.
;
Waterproof
fault
The water protection
system has reacted.
Close the stopcock.
Call the Service
Department.
;
Technical
fault
There is a fault. Start the programme again.
If the fault message appears
again, contact the Service
Department.
A To switch off the fault message: Switch the machine off with the K button.
Problem solving guide
40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele W 5748 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele W 5748 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info