551400
44
Zoom out
Zoom in
Previous page
1/80
Next page
Problems with the load size indicator or calibrating to zero
Problem Possible cause Remedy
The display indicates
a load of
<25% or no
load size is indicated
when the drum is
full.
There was already
laundry in the drum
when the machine
was switched on.
This has decalibrated
the sensor from the
zero setting.
^
To recalibrate the sensor to the
zero setting:
Remove the laundry from the
drum.
Switch off the washing
machine and leave the door
open.
Switch on the washing
machine.
Press the Cottons programme
button.
Press and hold the Load/
Detergent button pressed in
until the following message
appears in the display:
Zero setting
OK.
The display indicates
a load of
25%, 50%,
75% or 100% when
the drum is empty
The load size sensor
has been
decalibrated from the
zero setting.
Rotate the drum once. If the
display still indicates a load of
25%, 50%, 75% or 100%,
recalibrate the sensor to zero
again (see above section)
The fault message:
Zero setting
not possible
appears in the
display.
The drum door is
closed.
Open the drum door.
Switch off the washing
machine and leave the door
open.
Switch on the washing
machine.
Try and recalibrate to zero
again.
Problem solving guide
44
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele W 2839i WPM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele W 2839i WPM in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele W 2839i WPM

Miele W 2839i WPM User Manual - German - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info