551393
52
Zoom out
Zoom in
Previous page
1/68
Next page
Shortening the door panel
You can shorten the door panel to
match the height of adjacent kitchen
unit door fronts.
First of all you need to calculate
measurement X. This is the distance
from the lower edge of the washing
machine door to the lower edge of an
adjacent kitchen unit door front.
Procedure
^
Open the door.
^ First remove the door panel:
to do this unscrew the 10 screws
(see arrows) from the inside machine
door.
^ Then remove the three decor strips
from the door panel:
to do this unscrew the screws.
^
Shorten the door panel
and the two
side decor strips
at the bottom by
measurement X using a suitable saw.
^
Drill four holes for securing the lower
decor strip into the door panel.
^
Fit the decor strips and the door
panel.
If you are intending to fit a decor
panel, check whether this will also
need to be shortened.
Installation
52
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele W 2129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele W 2129 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info