312144
39
Zoom out
Zoom in
Previous page
1/64
Next page
A fault indicator light comes on but the wash programme
continues as normal.
Problem Possible cause Remedy A
The Check drain
light flashes.
The drain outlet is
restricted.
Clean the fluff filter and the drain
pump as described in "Problem
solving guide – Opening the lid in
the event of a blocked water
outlet and/or a power failure".
The Check inlet light
flashes.
The water inlet is
restricted.
Check whether
the stopcock is opened wide
enough.
the inlet hose is kinked.
The filter in the water
inlet hose is dirty
Clean the filter.
The Excess
detergent light is
flashing.
Excessive foam has
built up during
washing.
Use less detergent next time and
follow the manufacturer's
instructions on dosage given on
the packaging.
The Main wash
indicator light is
flashing in the
programme
sequence display.
There is a fault. Start the programme again.
If the fault indicator occurs again,
contact the Service Department.
The Finish indicator
light is flashing in
the programme
sequence display.
The position of the programme selector was altered
after the start of the programme. Turn the programme
selector back to the programme previously chosen.
ATo switch off the fault indicator: turn the washing machine off with the
I-ON/0-OFF
button and turn the programme selector to
Finish
.
Problem solving guide
39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele w 163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele w 163 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info