302758
26
Zoom out
Zoom in
Previous page
1/32
Next page
Installation
Fitting a plinth facia
The appliance plinth below the door
can be concealed using a plinth facia.
The height and return of the appliance
plinth cannot be altered.
A higher plinth facia can only be in-
stalled if the overall niche height is
higher.
Plinth height 100 mm (standard)
Niche height 820 mm:
Plinth height 150 mm
Niche height 870 mm: a spacer frame
is required.
Plinth height 200 mm
Niche height 920 mm: two spacer
frames are required.
A plinth facia (60 cm long) can be or-
dered from your kitchen Dealer or
manufacturer. For Miele kitchens
please quote the model number when
ordering.
A cut-out must be made in the plinth
facia around the ventilation slots as
otherwise the airflow to the appliance
will be blocked and the machine will
not work.
Fitting the plinth facia
Stick the small template (supplied) to
the rear upper edge of the plinth
facia.
Cut the plinth facia out following the
template.
Use the strip supplied to seal the cut-
out edge.
Stick the velcro fastener provided to
the appliance plinth.
For this the following procedure is rec-
ommended:
Match up the hooked side and the
looped side of the velcro fastener
lengthwise.
Cut into 2 or 3 pieces.
Peel off the protective backing from
one of the velcro fastener pieces.
Position the cut pieces along the ap-
pliance plinth, at the left and right
hand edge, and in the middle. Press
firmly into place.
Now peel the protective backing off
the other velcro fastener piece.
Address the plinth facia to the adhesive
backing on the velcro and press firmly
into place.
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele t 586 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele t 586 c in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info