668695
36
Zoom out
Zoom in
Previous page
1/100
Next page
How to replace an Active AirClean
filter or an AirClean+ filter (dia. 29 +
30)
Do not use more than one exhaust
filter at a time.
^
Press the button on the rear of the
vacuum cleaner and remove the lid
(dia. 26).
^
Take out the used Active AirClean or
AirClean+ filter.
^
Insert a new Active AirClean or
AirClean+ filter.
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
^ Put the lid back on and close it.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters
(dia. 25):
a AirClean
b Active AirClean (SF-AAC 10)
c AirClean+ (SF H 10)
You can replace the filter supplied with
the vacuum cleaner with one of the
other filters listed above.
Do not use more than one exhaust
filter at a time.
The exhaust filters have different
properties (see "Optional accessories").
When changing the filter please note:
1. If you wish to replace exhaust filter a
with filter b or c, it is essential that you
remove the filter grille from the lid
before you fit the new filter.
2. If you wish to replace exhaust filter b
or c with filter a, it is essential that you
also fit the filter grille * in the lid.
* Filter grille - see "Optional
accessories".
To remove or insert the filter grille
(dia. 31)
^
Grasp inside the hexagons in the
filter grille in the positions shown by
the arrows and squeeze slightly. The
grille can then be removed or
inserted.
When to change the thread lifters
The thread lifters on the suction inlet to
the floorhead can be replaced.
Check them from time to time and
replace them if the pile has worn down.
How to replace the thread lifters
(dia. 32)
^
Use a suitable screwdriver to remove
the thread lifters from the slots.
^
Fit new thread lifters.
Replacement parts are available from
your Miele Dealer or from Miele (see
end of booklet for contact details).
en
36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Swing H1 Ecoline Plus - HS07 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Swing H1 Ecoline Plus - HS07 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info