683677
36
Zoom out
Zoom in
Previous page
1/120
Next page
en
36
Preparing for use
Attach the suction tube (dia. 01)
Fit the suction tube with the square
hole facing upwards into the body of
the vacuum cleaner and twist gently
until it clicks into place.
To detach the suction tube
Press the release button (see detail)
and pull off the tube with a gentle
twist.
Connect the handle to the suction
tube (dia. 02)
Fit the handle with the square hole fa-
cing upwards into the tube and twist
gently until it clicks into position.
To detach the handle from the suction
tube, press the release button and
pull the handle out of the suction
tube, twisting it slightly as you do so.
The handle can also be fitted directly to
the body of the vacuum cleaner (dia.
03).
The vacuum cleaner is then easier to
use, e.g. when vacuuming mattresses,
upholstery etc.
Fitting the floorhead (dia. 04)
Attach the floorhead to the vacuum
cleaner connection stub and twist
gently until it clicks into position.
To remove the floorhead, press the
release button and pull the vacuum
cleaner away from the floorhead
twisting it slightly as you do so.
The suction tube can also be attached
to the vacuum cleaner connection stub
(dia. 05). This is useful for vacuuming
underneath low furniture, for example.
Winding up the mains cable (dia. 06)
When the vacuum cleaner is not in use
the cable can be wound around the two
cable hooks.
Secure the cable by clamping the plug
to the cable (see detail).
Using the accessories supplied
(dia. 07)
Accessory clip
Crevice nozzle
Upholstery nozzle
Accessory clip (dia. 08)
(depending on model)
If required, attach the accessory clip
to the suction tube.
Push the accessory clip down over
the cable hook ring until it clicks into
position.
The accessory clip holds the accessor-
ies (dia. 09).
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
Electrobrush
Turbobrush
These are supplied with their own oper-
ating instructions.
Using the SRD hard floorbrush
(depending on model)
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Swing H1 EcoLine - SAAP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Swing H1 EcoLine - SAAP3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info