Manual Miele SEB 216 (page 10 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

530010

Zoom out

Zoom in

1/80

Connecting the Electrobrush

to the vacuum cleaner

Connect the Electrobrush to the

vacuum cleaner as shown in the

illustrations at the end of the operating

instructions.

Cylinder vacuum cleaner - see

illustrations a to c

Hand-held vacuum cleaner - see

illustration d

The position of the socket for

connecting the Electrobrush will

depend on the vacuum cleaner model.

For S 500 / S 700 and S 5000 vacuum

cleaners the protective cap must be

removed from the socket: see

illustration a to b.

For SEB 216-3 (see illustration b)

This Electrobrush is easily removed

enabling one of the other accessories

to be used.

Press the release button and pull the

suction tube with plug connector out

of the Electrobrush.

The cable will remain on the suction

tube.

Cable

When the Electrobrush is connected to

a cylinder vacuum cleaner, the cable

must be secured to the telescopic tube

and to the suction hose. Nine clips are

supplied for this:

–

two for securing the cable to the

telescopic tube (already in position)

–

seven for running the cable along the

suction hose (these can be adjusted)

Fit the clips to the suction hose

leaving approximately the same

distance between each clip.

Switching on and off

The Electrobrush is operated in

conjunction with the vacuum cleaner.

Some models, however, are fitted with a

switch which allows the Electrobrush to

be switched on and off separately.

Warning light

The warning light on the Electrobrush is

green when the Electrobrush is

switched on.

If the warning light on the

Electrobrush is red, there is a

blockage in the roller, see "Warning

and Safety instructions, Blocked

roller warning light".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele SEB 216 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele SEB 216 Manual

Product: