523799
40
Zoom out
Zoom in
Previous page
1/128
Next page
Some models also have symbols on the
controls. The symbols indicate the type
of use the settings are suitable for.
The setting selected will light up yellow.
# - curtains, lightweight fabrics
$ - upholstery, cushions
% - thick pile carpets, rugs and
runners
* - for energy-saving vacuuming
(this setting is also very quiet)
( - loop-pile carpets
) - heavily soiled hard flooring and
for intensive cleaning of carpets
,
When using the AirTeQ
floorhead, if the suction seems too
high, reduce the suction until the
floorhead is easier to manouevre.
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following suction power
selectors:
+ /- foot controls (dia. 21)
The first time the vacuum cleaner is
switched on, the highest power setting
will be selected automatically.
After that, the vacuum cleaner will
switch on at the setting which was used
previously.
^
Press the + foot control to select a
higher setting.
^
Press the - foot control to select a
lower setting.
Foot controls with Automatic (dia. 22
+ 23)
The first time the vacuum cleaner is
switched on, the "Auto" power setting
will be selected automatically.
Auto = suction power is automatically
adjusted for the type of floor
being vacuumed
,
Do not use the "Auto" setting to
vacuum lightweight materials or
curtains. These could be sucked in
and possibly damaged.
^ Press the + control to change to
"Turbo", the highest power setting.
^ Press the - foot control to change to
"Min.", the lowest power setting.
After that, the vacuum cleaner will
switch on at the setting which was used
previously.
Radio-control handle with Automatic
(dia. 24)
When the vacuum cleaner is switched
on with the On/Off foot control s, the
Stand-by - indicator on the vacuum
cleaner will light up yellow.
^
Press the Stand-by button - on the
handle.
The Stand-by indicator - on the
vacuum cleaner will go out.
The first time the vacuum cleaner is
switched on, the highest power setting
will be selected automatically.
After that, the vacuum cleaner will
switch on at the setting which was used
previously.
en
40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele S8 Medicair at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele S8 Medicair in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info