Manual Miele S 8330 HEPA (page 38 of 128) (English, German, Dutch, French, Italian)

523787

Zoom out

Zoom in

1/128

Adjusting the floorhead (dia.7+8)

The floorhead can be used for all

normal cleaning of carpets and rugs. It

can also be used with the brush

protruding to vacuum hard flooring. For

hard flooring, such as stone and

parquet, we recommend using one of

the special Miele floor brushes (see

"Optional accessories").

It is important to observe the flooring

manufacturer's cleaning and care

instructions.

Vacuum carpets and rugs with the

brush retracted:

^ Press the foot control %.

Clean hard flooring which is not

susceptible to scratching with the brush

protruding:

^ Press the foot control ).

Clean flooring which has deep

crevices or grooves with the brush

protruding.

AirTeQ floorhead (dia. 8)

This floorhead has been specially deve

loped to achieve excellent cleaning

results using low energy. It has

particularly low power consumption and

high suction capability.

Warning: If the suction power of

the AirTeQ floorhead seems too

high, reduce the suction until the

floorhead is easier to manouevre

(see "Use - regulating the suction").

Activating the exhaust filter change

indicator

Depending on model, your vacuum

cleaner will be fitted as standard with one

of the following exhaust filters (dia. 9):

a Air Clean

b ActiveAirClean 50 (black)

c HEPA AirClean 50 (white)

If your vacuum cleaner is fitted with

filter b or c, the exhaust filter change

indicator needs to be activated.

Lift the release catch for the dust

compartment lid and raise the lid as

far as it will go (dia.10).

^ Remove the label (dia.11).

^ Press the exhaust filter change indi-

cator ~ (dia. 12).

^ After approx. 10 - 15 seconds a thin

red stripe will appear in the left hand

side of the strip (dia. 13).

Close the dust compartment lid

securely, making sure it clicks into

position. Take care not to trap the

dustbag when doing so.

The exhaust filter change indicator

shows the remaining functional life of

the exhaust filter. After approx. 50

operating hours, or approx. one year of

average use, the strip will be

completely red (dia. 14).

Miele S 8330 starts but won’t change speed , is it a broken or stuck switch? I’m talking about the switch on the right hand side with the plus symbol !
Can you help? Submitted on 11-9-2018 at 08:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele S 8330 HEPA in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele S 8330 HEPA Manual

Product: