Manual Miele S 8330 HEPA (page 31 of 128) (English, German, Dutch, French, Italian)

523787

Zoom out

Zoom in

1/128

Do not pull or carry the appliance by the cable, and be

careful not to damage the cable when withdrawing the

plug from the socket.

Keep the cable away from sharp edges and do not let it be

squashed, for example, under a door.

Avoid running the vacuum cleaner over the cable. This

could damage the cable, plug or socket. The appliance

must not be used if any of these have suffered damage. A

damaged cable, plug or socket is a safety hazard.

Do not use the vacuum cleaner if the cable is damaged.

If the cable is damaged it must be replaced together with a

complete cable rewind. For safety reasons this work must

be done by the Miele Service Department or a Miele

authorised service technician.

The socket on the vacuum cleaner (depending on

model) must only be used for the Miele Electrobrush

specified for use with this appliance.

When vacuuming especially fine dust, e.g. sawdust,

sand, plaster, flour, talcum powder etc., electrostatic

charges build up naturally. Under certain conditions these

charges will be released. To avoid the unpleasant effects

of these discharges, a metal inlay has been incorporated

into the underside of the handle. Please make sure that you

keep your hand in constant contact with this metal strip

during vacuuming.

en - Warning and Safety instructions

Miele S 8330 starts but won’t change speed , is it a broken or stuck switch? I’m talking about the switch on the right hand side with the plus symbol !
Can you help? Submitted on 11-9-2018 at 08:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele S 8330 HEPA in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele S 8330 HEPA Manual

Product: