447870
21
Zoom out
Zoom in
Previous page
1/54
Next page
Levelling the machine
This machine does not require a plinth. However,
make sure that any uneven areas of the floor are
made level.
The machine must be perfectly level to ensure that it
functions correctly.
The screw feet A can be adjusted to align the
machine.
After aligning the machine correctly you need to use
a screwdriver to secure discs B to the floor plate.
Installation on a raised plinth
The dryer can be installed on a raised concrete
plinth.
,
If the machine is installed on an on-site plinth,
it must be secured using the fixing brackets sup-
plied. Otherwise there is the danger of the ma
-
chine moving about.
^
Secure the front feet of the machine with the
clamps supplied.
^
Follow the fitting instructions supplied.
Fitting the language insert (Programme
selection panel)
Remove the protective film from the control panel.
Carefully lift up the bottom of the control panel foil
underneath the dial, then slide in the language insert
and align it.
Remove the dividers located underneath and press
the control panel foil into position.
Reducing the noise level
This dryer is fitted with an exhaust fan which can be
heard during operation.
If this noise disturbs you it is possible to fit a silencer
(available from Miele as an optional accessory) into
the dryer's exhaust duct (see Installation instructions).
Payment system
All COP models are fitted with a connection for a coin
control unit.
Empty the coin box every day. This prevents too
many coins or tokens collecting in the coin box,
which could lead to the machine breaking down.
Communication module XKM RS232
This machine can be fitted with a communication
module which enables it to be linked to a PC via a se
-
rial interface.
The shaft for the communication module is located on
the rear of the machine.
An editor programme is available from Miele.
Installation and connection
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele PT 8253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele PT 8253 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele PT 8253

Miele PT 8253 User Manual - German - 28 pages

Miele PT 8253 User Manual - French, Italian - pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info