581214
16
Zoom out
Zoom in
Previous page
1/54
Next page
Reprogramming individual drying
programmes
(Changing the Standard options)
Individual drying programmes can be altered to suit
specific requirements, practices and processes.
If the machine is connected to a payment system
(coin operation) it is not possible to reprogramme
the Standard options.
Before you begin, first ensure that:
The dryer is switched off with the "On/Off" switch.
The door is closed.
To access the programming level:
^
Press and hold the "START/STOP button and switch
the dryer on with the "On/Off" switch.
^
Hold the START/STOP button pressed in until the
light around the button stops flashing and lights up
constantly.
^ Release the START/STOP button.
P will flash alternately with 1 in the segment display.
Programmable functions P 1- P 27 (see next page)
are selected by turning the rotary dial clockwise.
They can also be selected by pressing the
Temperature selection button (PT 8xx1) or the Low
temperature additional option button K (PT 8xx3).
Programmable options, e.g. 0 or 1 are selected with
the START/STOP button.
The Temperature selection LED on time controlled
machines (Profitronic B and B COP) or the Low
temperature additional option LED on residual
moisture controlled machines (Profitronic B Plus)
shows which programmable function is currently
selected.
A short (quick) flash represents one unit, a long
(slow) flash represents ten units.
Example: The 5th Programmable function is
represented by the LED flashing five times quickly.
The 10th Programmable function is represented by
the LED flashing once slowly. Programmable
function 45 is represented by the LED flashing four
times slowly and five times quickly.
Example of reprogramming PT 8251, 8331, 8401
Profitronic B Timed programme machines
P 4 to alter the acoustic tone when a button is
pressed (see "Programmable functions").
^
Turn the time selection rotary dial three clicks
clockwise.
The Temperature selection LED will flash four times
quickly.
P will flash alternately with 0 in the segment display
(factory default).
Programmable option 0 = Off - 1 = On.
^
Pressing the START/STOP button will change the
option to 1.
To save the setting:
^
Switch the dryer off with the "On/Off" switch.
Example of reprogramming PT 8253, 8333, 8403,
8503, 8803 Profitronic B Plus Residual moisture
programme machines
P 2 to alter the buzzer which sounds at the end of
the programme (see "Programmable functions").
^ Turn the programme selection rotary dial one click
clockwise.
The Low temperature option LED K will flash twice
quickly.
P will flash alternately with 1 in the segment display.
Programmable option 0 = Off - 1 = On.
^
Pressing the START/STOP button will change the
option to 0.
To save the setting:
^
Switch the dryer off with the "On/Off" switch.
Reprogramming
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele PT 8251 - COP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele PT 8251 - COP in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele PT 8251 - COP

Miele PT 8251 - COP User Manual - German - pages

Miele PT 8251 - COP User Manual - French, Italian - pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info