77516
52
Zoom out
Zoom in
Previous page
1/68
Next page
To calculate the total duct
length
Friction against the inner walls of the
vent ducting will slow down the
expelled air as it passes through the
ducting. An elbow, bend, non-return
flap or wall vent creates more friction
than a straight duct. The friction
created by each of these is expressed
as an additional duct length factor.
The additional duct length factors are
calculated by comparing the friction
created by, for example, an elbow to
that created by 1 metre of straight
plastic piping (see Table 1).
The additional duct length factor for
each item needs to be added together
to ascertain the total duct length which
will be needed for the venting system.
The total duct length is a means of
calculating the friction created by the
venting system as a whole.
A larger internal duct diameter also
helps reduce friction. If the total duct
length is more than 20 m, the duct
diameter should be increased (see
Table II).
To calculate the total duct length
1. First measure the distance requiring
straight ducting
. Multiply this amount
by the corresponding additional
length factor in Table I.
2. Establish the number of angles,
bends etc., and add their additional
length factors together with the help
of Table I.
3. Add all the additional length factors
to give the total duct length.
4. Refer to Table II for the appropriate
duct diameter required.
Table I
Component Additional
duct
length
factor
Flexible ducting*
1 m laid straight
45° angle
(Bend radius = 0.25 m)
90° angle
(Bend radius = 0.25 m)
1.8 m
1.5 m
2.5 m
Flexible aluminium
ducting*/plastic piping
1 m laid straight,or1m
straight pipe
45° angle
(Bend radius = 0.25 m)
90° angle
(Bend radius = 0.25 m)
1.0 m
0.6 m
0.8 m
Wall vent kit* or window vent
kit*
with louvred grill
with non-return flap (hinged
flap)
3.8 m
1.5 m
Non-return flap* integrated into
the vent ducting
14.3 m
Flat ducting (for washer-dryer
stack)*
11.0 m
Venting connection to the
left/right
1.0 m
* optional accessory
Table II
Maximum total
duct length allowable
Internal duct
diameter required
20 m
40 m
80 m
100 mm
125 mm
150 mm
Installation - extraction ducting
52
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele PT 5136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele PT 5136 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele PT 5136

Miele PT 5136 User Manual - German - 64 pages

Miele PT 5136 User Manual - Dutch - 56 pages

Miele PT 5136 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info