666764
37
Zoom out
Zoom in
Previous page
1/46
Next page
This machine must be installed by an
authorised technician only. In the UK any
gas heated machines must be installed
by a Gas Safe registered engineer.
,
This machine is not designed for
washing items which have been treated
with dangerous or flammable substances.
Transport packaging must be carefully
removed using suitable tools.
The machine must be level and secure after
installation (see installation diagram
supplied with the machine).
To avoid the risk of frost damage do not
install this machine in a room where there is
a risk of frost occuring.
Do not install the machine on carpeted
flooring as the carpet pile can hinder the
free flow of air into the ventilation gaps at the
bottom of the machine.
Transit fittings
Brackets "A" (2 on each side) are secured
with hex screws which have to be removed
using a suitable tool.
Transit fittings "B", (2 at the front adn 2 at the
back) are secured with 3 hex screws each.
These have to be removed on site before the
machine is commissioned for use.
To do so the access panel and the rear
panel of the machine have to be removed.
Unscrew the hex screws from the bottom
edge of the front access panel and then take
the access panel off.
Unscrew the hex screws from the back
panel and then take the back panel off.
The front plinth facing is screwed to the
back panel. The rear plinth facing is located
under the machine lid and has to be fitted
after the machine has been successfully set
up. Screws are supplied in the accessories
pack for this.
Store the transit fittings in a safe place for
future use. They will need to be refitted
should the machine every need to be
moved to another location.
Use a pallet lifter to move the machine
around the room.
The machine must not be moved without
all the outer panels in place.
Notes for the installer
M.-Nr. 06 572 495 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Professional PW 6321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Professional PW 6321 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele Professional PW 6321

Miele Professional PW 6321 User Manual - German - 46 pages

Miele Professional PW 6321 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info