666768

Miele Professional PW 6207 Manual

13
Zoom out
Zoom in
Previous page
1/80
Next page
Detergent dispensing
It is important to avoid adding too much detergent as
this causes excessive foam.
–
Do not use detergents which create a lot of foam.
–
Follow the detergent manufacturer's instructions for
use.
The right amount to dispense will depend on the
following:
–
The amount of laundry
–
The water hardness level
–
The soiling level of the laundry
The amount to dispense
Take the water hardness into account and follow the
detergent manufacturer's instructions on the
packaging.
Water hardness levels
Hardness
range
Water
properties
Hardness
level in
mmol/l
German
scale
°d
I soft 0 - 1.3 0 - 7
II medium 1.3 - 2.5 7 - 14
III hard 2.5 - 3.8 14 - 21
IV very hard above 3.8 above 21
Check with your local water supplier if you do not
know the hardness level in your area.
Gas heated machines
On gas heated machines the suds solution is
pumped around the heater elements. This additional
agitation of the suds solution creates foam. It is
therefore important to use a low-foaming detergent
and not to use too much detergent.
If over-foaming occurs use a reduced foam detergent
or call in a detergent application specialist.
Select a programme
^
Turn the rotary dial to select a programme (e.g.
Programme 1 Cottons).
For this example, the following will appear in the
display:
16 Separate drain
1 Cottons 90 °C
2 Cottons 60 °C
i äFC A
Select the Pre-wash, Starch stop or Without spin
additional option
^
Confirm the selection of the programme by
pressing the rotary selector.
For this example, the following will appear in the
display:
1 Cottons 10.0 / 10.0 kg
90 °C Main wash
Rinses 1100 rpm
+im k m A
^ If wished you can now select the Pre-wash
programme block, by pressing the +i function
button.
When the +i function button is pressed, the
following will appear in the display:
1 Cottons 10.0 / 10.0 kg
40 °C Pre-wash
90 °C Main wash 1100 rpm
+i mk m A
"+i" is highlighted.
Press the function button again to deselect the
function.
Press the m Starch stop button if the laundry is to
be starched.
Press the k Without spin button if you do not want
the laundry to be spun after being rinsed.
If you do not wish to make any further alterations to
the programme:
^
Press the START button. The programme will start.
How to wash correctly
13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Professional PW 6207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Professional PW 6207 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info