666767

Miele Professional PW 6167 Manual

26
Zoom out
Zoom in
Previous page
1/80
Next page
Possible reasons for increased levels of
foaming
–
Detergent type
^
Only use detergents formulated for commercial
washer-extractors. Domestic laundry detergents
are not suitable.
–
Using too much detergent
^
Follow the manufacturer's dosage
recommendations on the packaging and take local
water hardness levels into account.
–
Heavy foaming detergent
^
Use a low foaming detergent or contact your
detergent supplier for advice.
–
Very soft water
^
In areas with very soft water (hardness level 1)
dispense less detergent as specified by the
detergent manufacturer.
–
Soiling level of the laundry
^
For lightly soiled laundry dispense less detergent in
accordance with the detergent manufacturer's
instructions.
– Residues e.g. detergent on the laundry
^ Run a pre-wash without detergent and without
selecting a temperature.
Laundry which has been soaked before washing
must be thoroughly rinsed before running a wash
programme.
– Small loads
^ Reduce the amount of detergent dispensed
according to the size of the load.
–
Drum speed too high during the wash
(Profitronic controls)
^
Reduce the drum speed and the wash rhythm.
–
Gas-heated washer-extractors
On gas heated machines the suds solution is
pumped around the heater elements. This additional
movement of the suds can produce extra foam.
^
Follow the dispensing instructions given above.
^
Use a low lather detergent.
^
On Profitronic controlled machines and in special
circumstances it is possible to reduce the drum
speed and the wash rhythm during the heating-up
phase.
Large articles of laundry stretching
during the spin cycle
Large articles of laundry (e.g. table cloths) can
stretch during the spin cycle. This can generally be
prevented by reprogramming the machine.
Please contact the Miele Service Department.
Service interval
If after switching the machine on the following
message appears in the display the machine will
need to be serviced by the Miele Service
Department.
§
Service interval 1
Call the Service Department
A
The display will go out after 5 minutes.
Problem solving guide
26
… 26 …


Need help? Post your question in this forum.

Forumrules
1

Forum

miele-professional-pw-6167

Reset search

  • dear sirs
    we have a MIELE PW6167 machine , nowadays we are facing a problem .
    the amount of intake water due to the quantity of detergent loaded to the machine is not stable , there is a distinct deterioration .
    so please tell us about this problem and the suggested solution by your technical support team .
    thanks a lot in advance
    eng. yaghia Submitted on 7-10-2020 at 20:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Professional PW 6167 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Professional PW 6167 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info