Manual Miele Professional PW 6167 (page 6 of 80) (English, Dutch)

666767

Zoom out

Zoom in

1/80

Further notes

Cleaning and disinfecting agents often contain

chlorine-based substances. Do not let such agents

dry out on stainless steel surfaces, as the chlorine

can have a corrosive effect. Use chlorine-free agents

for washing and disinfecting and also for cleaning

stainless steel surfaces to protect them from

corrosion.

If in doubt, confirm with the manufacturer that their

product is suitable. If any agent containing chlorine

comes into contact with the stainless steel surfaces,

wipe it away immediately with clean water. Then dry

with a soft cloth.

The manufacturer cannot be held liable for the

effect of a chemical cleaning agent on laundry or the

machine, even when the use of such agents is

recommended.

Please note that changes to the product which have

not been made known by the manufacturer can affect

the quality of the wash result.

Using accessories

Accessory parts may only be fitted when

expressly approved by Miele. Using spare parts or

accessories from other manufacturers will invalidate

the guarantee, and Miele cannot accept liability.

Any additional components used, e.g. suction

devices for liquid agents, electronic water meters or

dispenser monitors, must conform to Safety Class II.

If connected to an external PC, this must conform to

EN 60950-1:2001 (IEC 60950-1:2001).

Chlorine and component damage

Notes on using chlorine bleach and

perchlorethylene

Frequent use of chlorine increases the risk of

component damage.

The use of agents containing chlorine, such as

sodium hypochlorite and chlorine bleach in powder

form, can damage the protective upper surface of

stainless steel and cause corrosion to components.

Factors affecting this are chlorine concentration

levels, contact time and temperature. It is therefore

advisable to avoid the use of such agents. Oxygen

based bleaching agents should be used instead.

If, however, chlorine based bleaching agents have to

be used for particular types of soiling, then

anti-chlorine measures must also be carried out. If

this is not done irreparable damage can occur to

components in the machine and to laundry.

Anti-chlorine treatment

Anti-chlorine treatment has to be carried out

immediately after chlorine bleach has been used. The

use of hydrogen peroxide or an oxygen based

cleaning or bleaching agent is recommended and the

laundry should not be drained in between.

With thiosulfate, especially when used with hard

water, gypsum can form, which can lead to

incrustations on laundry or deposits in the machine.

The use of hydrogen peroxide is preferable as it aids

the chorline neutralising process.

The exact quantity of additives and the treatment

temperatures required must be set and tested on site

in accordance with the dosage recommendations of

the detergent and additive manufacturers. The

laundry must also be tested to check whether it

contains any active chlorine residues.

Disposing of your old machine

Before disposing of an old machine, first make the

door lock unusable. This way you will prevent

children from accidentally locking themselves in and

endangering their lives.

All personnel working with this machine must be

fully trained in all aspects of its use and safety.

Keep these instructions in a safe and accessible

place.

Warning and Safety instructions

dear sirs
we have a MIELE PW6167 machine , nowadays we are facing a problem .
the amount of intake water due to the quantity of detergent loaded to the machine is not stable , there is a distinct deterioration .
so please tell us about this problem and the suggested solution by your technical support team .
thanks a lot in advance
eng. yaghia Submitted on 7-10-2020 at 20:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele Professional PW 6167 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele Professional PW 6167 Manual

Product: