Manual Miele Professional PT 8337 WP (page 28 of 76) (English, Dutch)

666798

Zoom out

Zoom in

1/76

Cleaning the heat exchanger

Regular and specialist maintenance of the entire

system will maintain the high efficiency of the unit and

help increase the lifespan of its components.

During use, fluff from textiles as well as detergent

residues and other elements present in the

condensed steam collect on the heat exchanger.

Soiling on the heat exchanger reduces heat transfer

to the air and in so doing the efficiency of the unit.

This is why it is important to clean the heat exchanger

regularly. More frequent cleaning may be required

where there is a heavy build-up of fluff or the dryer is

operated very frequently.

A nozzle is supplied for easier cleaning. Attach the

nozzle to a water hose with a 3/4" screw connection.

–

Make sure that the unit is completely

disconnected from the mains electricity supply.

There must be no voltage present.

–

Open the maintenance panel on the back of the

heat pump unit. Place the maintenance panel to

one side safely (danger of injury and tripping over

it).

–

Before starting the rinsing process, take out the

collection tray and remove coarse soiling from it.

This will prevent the drain from becoming blocked.

Ensure that the slats are not bent or damaged.

–

Clean the heat exchanger with a brush in the area

shown in the diagram (see arrows). Replace the

collection tray before you start rinsing.

–

Use a jet of water (max. 4 bar) to rinse the heat

exchanger thoroughly for several minutes. Use the

hose and nozzle to do this.

The use of water is permitted only within the

specific area of the heat exchanger outlined by the

frame in the diagram. The use of pressure washers

or cleaning agents containing chlorine, sand,

sodium carbonate or acid is not permitted.

–

Make sure that you provide adequate drainage for

the water used for cleaning to avoid flooding the

dryer or the room in which it is located.

–

Remove any soiling which has not been rinsed out.

–

Clean the collection tray and check the drain for

any blockages.

–

Make sure the heat exchanger is enclosed by the

maintenance panel before operating the unit again.

–

Make sure that no electrical parts have come into

contact with water before supplying electricity to

the unit again.

–

Avoid touching the slats to protect them from

damage and wear gloves to prevent cuts to your

hands.

Water may be used to clean the heat

exchanger (in the area behind the maintenance

panel) only. Using water to clean the dryer and

other parts is not permitted. Danger to life from

electric shock.

To ensure the correct performance of the

tumble dryer and to prevent the risk of faults and

fire, it is important to check it and carry out

maintenance on a regular basis.

Cleaning and care

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele Professional PT 8337 WP in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele Professional PT 8337 WP Manual

Product: