312128
31
Zoom out
Zoom in
Previous page
1/40
Next page
Installation
Installation surface
Experience has shown that a concrete
floor is the most suitable for a washing
machine. Concrete floors are far less
prone to vibration during the spin cycle
than wooden floorboards.
Please note the following points:
The machine must be level and se-
curely positioned.
To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installation must be on a wooden
joist floor: we recommend the use of
a plywood base (at least
59x52x3 cm). Ideally the base
should be large enough to span sev-
eral joists and should be bolted to
the joists and not just the floor-
boards. Check for presence of pipes
and cables first.
As a general rule, we recommend
the installation of the machine (or
washer/dryer stack) in the corner of
a room where the stablity of the floor
is at its greatest.
If the machine is installed on a raised
plinth, it must be secured against slip-
page during spin using retaining clips
(available from the Miele Spare Parts
Dept).
Installation
Lift the machine from its packaging
base and move it to its site. Please
note:
Do not lift the machine by the drum
door.
Ensure that the machine feet and the
floor are dry to prevent the machine
from slipping during the spin cycle.
Removing the transit fitting.
Using combination pliers, pull out
the retaining clips on the right and
left of the support plate.
Using a pipe wrench turn the left-
hand transit bar 90° anti-clockwise
and the right-hand transit bar clock-
wise.
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele novotronic w 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele novotronic w 820 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele novotronic w 820

Miele novotronic w 820 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info