791618
74
Zoom out
Zoom in
Previous page
1/88
Next page
Installation
*INSTALLATION*
74
Carefully remove the protective foil
from the supplied sealing strip.
Fix the sealing strip flush with the
front of the appliance on the door
opening side.
1. Position the sealing strip flush with
the lower edge of the top fixing
bracket.
2. Stick it down along its entire length.
If necessary, insert the locking pins
supplied for limiting the door opening
into the hinges from above (see “In-
stallation – Adjusting the hinges”).
Installing the wine conditioning unit
If the wine conditioning unit is
pushed too far into the niche, the
door will not close properly. This can
cause ice to build up, condensate to
accumulate and lead to faults in the
appliance. These can all lead to in-
creased energy consumption.
Push the wine conditioning unit into
the building-in niche, making sure a
gap of 42mm is maintained all round
between the appliance carcase and
the front of the housing unit side
walls.
Push the wine conditioning unit into
the niche until the fixing brackets at
the top and bottom touch the front
edge of the side walls of the housing
unit.
- With 16mm thick unit walls:
The spacers should touch the front
edge of the housing unit side walls at
the top and bottom.
- With 19mm thick unit walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the housing unit side
wall.
Check the position of the fixing
brackets at the top and bottom front
edge of the housing unit side wall
again.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele KWT 6422 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele KWT 6422 in the language / languages: English as an attachment in your email.

The manual is 5.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele KWT 6422

Miele KWT 6422 User Manual - German - 88 pages

Miele KWT 6422 User Manual - Dutch - 88 pages

Miele KWT 6422 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info