693750
51
Zoom out
Zoom in
Previous page
1/80
Next page
Problem solving guide
51
Problem Cause and remedy
The hob has switched
off automatically. When
the element is switched
back on, appears
above the On/Off
sensor control.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.
Clean off any dirt and/or remove the object (see
“Safety features” – “Safety switch-off”).
After the hob has been
switched on, appears
in the timer display for a
few seconds. The hob
does not heat.
The hob is in demonstration mode.
Touch the 0sensor control on any of the numerical
displays.
Then touch the and sensor controls at the
same time until flashes alternately with in
the timer display.
When you place a pot or
a pan on the hob the
corresponding numer-
ical keybank does not
appear.
The pan cannot be detected in this position because
it is very small.
Re-position the pan. If it is still not detected, use a
different pan.
The pan is unsuitable.
Use suitable pans (see “pans” in the “Induction”
chapter).
The symbol lights up. The pans are too close together.
Re-position the pans. Move the pans one after the
other, not all at the same time.
You re-position a pan
and the set power level
starts to flash.
The pan cannot be detected.
Touch the flashing power level.
If the power level continues to flash, re-position
the pan.
You re-position a pot or
a pan, the set power
level goes out and 0
lights up.
The pan cannot be detected.
Reset the power level.
A zone switches itself
off automatically.
It has been operated for too long.
Switch a power level back on again (see “Safety
switch off” in the “Safety features” chapter).
A zone or the whole hob
switches off automatic-
ally.
The overheating protection mechanism has been ac-
tivated.
See “Overheating protection” in the “Safety fea-
tures” chapter.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele KM7697 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele KM7697 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele KM7697

Miele KM7697 User Manual - German - 80 pages

Miele KM7697 User Manual - Dutch - 80 pages

Miele KM7697 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info