516845
8
Zoom out
Zoom in
Previous page
1/28
Next page
Technical safety
To avoid the risk of damage to the
appliance, make sure that the rat
-
ing on the data plate corresponds to
the voltage and frequency of the house
-
hold supply, before connecting the ap
-
pliance to the mains supply. Consult a
competent person if in doubt.
The electrical safety of this appli
-
ance can only be guaranteed when
continuity is complete between the ap
-
pliance and an effective earthing sys
-
tem, which complies with local and na
-
tional safety regulations. It is most im
-
portant that this basic safety require-
ment is tested by a qualified electrician.
and where there is any doubt the elec-
trical system in the house is checked
by a qualified electrician.
The manufacturer cannot be held re-
sponsible for the consequences of an
inadequate earthing system (e.g. elec-
tric shock).
For safety reasons this appliance
must only be operated as a built-in
appliance. This is necessary to ensure
that all electrical components are
shielded.
Never open the casing of the appli
-
ance.
Tampering with electrical connections
or components is highly dangerous to
the user and can cause operational
faults.
Installation work and repairs may
only be carried out by suitably
qualified and competent persons to en
-
sure safety.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held responsi
-
ble.
The appliance is only completely
isolated from the electricity supply
when:
the mains fuse is withdrawn
or the screw-out fuse is removed (in
countries where this is applicable)
it is switched off at the isolator or at
the wall socket and the plug re-
moved.
Do not pull on the cable, only on the
plug.
Do not connect the appliance to
the mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the ap-
pliance, (e.g. danger of overheating).
Warning and Safety instructions
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele KM 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele KM 420 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info