525478
49
Zoom out
Zoom in
Previous page
1/56
Next page
Aligning the appliance
^
Take the bottom shelf out of the
appliance door. This will make it
easier to build in the appliance.
^
Hold the plinth facing at the side and
pull it forwards and off.
With a building-under height of
820 mm the adjustable feet must not
be extended.
With a building-under height of more
than 820 mm the feet must be
extended. For example, with a
building-under height of 870 mm, the
feet must be extended by approx.
50 mm.
^ Adjust the feet according to the
height of the niche and make sure
the appliance is level.
The appliance should be aligned so
that it fits fairly tightly between the
floor and the worktop.
Proceed as follows:
^
Adjust both rear feet using
appropriate screws a at the front
right and left in the appliance plinth.
Usea7mmflat-bladed screwdriver
to do so.
^
Use an allen key to unscrew both
front feet.
As soon as the feet have been
unscrewed slightly, you can also
adjust them with a screwdriver at the
bottom of the foot (see small
illustration above).
^
Insert the piece of foam rubber
supplied a. Important. This ensures
a separated air flow and prevents
malfunctioning.
^
Refit the plinth facing and pull it
forwards until the ventilation slats are
in alignment with the neighbouring
furniture plinths.
^
Hold the plinth facing securely and
attach it on the right and left using
the bolts supplied b.
Building in the appliance
49
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele K 9124 UiF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele K 9124 UiF in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele K 9124 UiF

Miele K 9124 UiF User Manual - German - 60 pages

Miele K 9124 UiF User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info