342372
75
Zoom out
Zoom in
Previous page
1/92
Next page
^
Remove the oven shelf supports and
lower the top heat heating element.
^
Remove the roof liner (depending on
model).
^ Unscrew the vapour outlet screws.
^
Remove the vapour outlet.
It is no longer required.
^
Some models also have a perforated
panel fitted underneath the vapour
outlet. It must be removed before fit
-
ting the catalyser as it is no longer re
-
quired.
^
Press back the oven ceiling insula
-
tion.
^ Gently compress the fitting guide b
and put in place.
Then release the fitting guide and in
doing so press back the insulation.
Ensure that the insulation is fully
pressed in by the fitting guide.
Do not allow the insulation to get
trapped by the fitting guide.
The fitting guide remains in the ap
-
pliance once fitted.
For reasons of hygiene, the area
around the catalyser should be thor
-
oughly vacuum cleaned to ensure
that insulation fibres cannot get into
the oven cavity.
Service engineer fitting instructions
75
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele k 303 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele k 303 i in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info