105329
59
Zoom out
Zoom in
Previous page
1/84
Next page
Cleaning each type of enamel
Allow the oven to cool down before
cleaning. Danger of burning.
Clean the oven floor ("Clean-Ena-
mel) after each use.
The oven should also be cleaned
regularly, preferably after each use.
Waiting too long will make cleaning
very difficult and in extreme cases
not very effective.
Never use hard brushes, scouring
cloths, steel wool, knives or other
abrasive materials. The enamel
would be damaged.
Remove the accessories and the run-
ners from the oven. (See following
pages for release).
Clean the "Clean-Enamel" surfaces.
A mild proprietary cleaner, without
sand or scouring agents, may be
used.
Normally the catalytic liners can be
left in place and wiped over. Use a
solution of warm water and a little
washing up liquid and a soft brush to
clean catalytic surfaces.
The catalytic liners should rarely
need to be removed. See following
pages for procedure.
Do not use oven spray or abrasive
cleaning agents on the catalytic sur-
faces. Do not wash the panels in a
dishwasher. Any mechanical hand-
ling would damage the catalytic en-
amel.
In addition, heating the oven to a high
temperature will help remove soiling on
the catalytic surfaces which has been
caused by grease and oil splashes.
Turn the oven function selector to
"Fan heat D".
Turn the temperature selector to the
highest setting.
Let the oven operate for about one
hour. The length of time will depend on
the degree of soiling. It is a good idea
to set the finish time for the process
using the timer. This way you will not for-
get to switch the oven off at the end.
Every time the oven is used at high tem-
peratures any remaining soiling will
gradually disappear.
Should the catalytic coating on the
back panel or any other catalytic
panels fitted become ineffective
through improper use or heavy soil-
ing, for example, a replacement can
be obtained from your Miele dealer
or Miele Spare Parts dept.
Cleaning and care
59
59


Need help? Post your question in this forum.

Forumrules
1

Forum

miele-h-256

Reset search

  • Do you have an approximate manufacture date for the Miele oven h256? Submitted on 14-2-2021 at 03:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele H 256 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele H 256 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele H 256

Miele H 256 User Manual - German - 80 pages

Miele H 256 User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info