693964
83
Zoom out
Zoom in
Previous page
1/100
Next page
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
83
Electrical connection
Danger of injury!
Installation, repairs and other work
by unqualified persons could be dan-
gerous. Miele cannot be held liable
for unauthorised work.
Connection to the electrical supply
must be carried out by a suitably
qualified and competent person in
accordance with local and national
safety regulations. Ensure power is
not supplied to the appliance until
after installation or repair work has
been carried out.
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with current national
and local safety regulations (BS 7671 in
the UK).
Connection should be made via a fused
connection unit or a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been installed.
If the switch is not accessible after in-
stallation (depending on country) an ad-
ditional means of disconnection must
be provided for all poles.
Switches with a minimum all-pole con-
tact gap of 3mm are suitable for isolat-
ing the appliance. These include circuit
breakers, fuses and protective devices.
Connection data
The required connection data are given
on the data plate located on the oven
trim visible when the door is open.
Ensure that these match the mains sup-
ply.
When contacting Miele, please quote
the following:
Model number
Serial number
Connection data (voltage/frequency/
maximum connected load)
When replacing the cable supplied
with another cable or changing the
connection, only cable type H05VV-F
with a suitable cross-sectional area
(CSA) may be used.
Oven
The wires in the mains lead are col-
oured as follows:
Green/yellow = earth
Blue = neutral
Brown = live
WARNING - THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD).
Maximum connected load: see data
plate.
83


Need help? Post your question in this forum.

Forumrules
1

Forum

miele-h-2266-1-bp

Reset search

  • I bought the oven recently and it came without a manual
    I would like a printed manual Submitted on 17-6-2020 at 07:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele H 2266-1 BP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele H 2266-1 BP in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele H 2266-1 BP

Miele H 2266-1 BP User Manual - German - 100 pages

Miele H 2266-1 BP User Manual - Dutch - 100 pages

Miele H 2266-1 BP User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info