444384
55
Zoom out
Zoom in
Previous page
1/60
Next page
The plate warmer must be fitted
above a fixed interim shelf in the
housing unit to ensure that the hous
-
ing unit can support the weight of it
and of any other appliance installed
in combination with it.
When fitted in combination with an
-
other appliance, the plate warmer
must always be fitted as the lower of
the two appliances.
As the combination appliance is
placed directly on top of the plate
warmer once it is built-in an interim
shelf is not necessary in between
the two appliances.
^ Disconnect the fused connection
point from the mains electricity sup-
ply.
^ Then connect the plate warmer mains
cable to the fused connection point.
^
Push the appliance back into the
housing unit as far as the vapour strip
and align it.
Ensure that the housing unit is
aligned at a right angle.
^ Open the plate warmer drawer and
use two screws to secure the plate
warmer to the side walls of the
housing unit.
Three adhesive metal strips are sup
-
plied with the appliance.
The metal strips must be stuck to the
plate warmer in such a way that they
seal off the space between the plate
warmer and the housing unit. The
pocket of air created acts as an insula
-
tor and so prevents heat loss.
^
Remove the protective foil from the
adhesive strips.
Building in the plate warmer
55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele GWS 4.6-29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele GWS 4.6-29 in the language / languages: Dutch as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info