444384
52
Zoom out
Zoom in
Previous page
1/60
Next page
Electrical connection U.K.
It is essential that the electrical in
-
stallation instructions for any appli
-
ance which is fitted in combination
with the plate warmer are also ob
-
served.
Where another appliance is fitted in
combination with the plate warmer to
the same circuit, operating both ap
-
pliances at the same time could
cause an overload. If in doubt con
-
sult a suitably qualified electrician.
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with na-
tional and local safety regulations.
Installation, repairs and other work by
unqualified persons could be danger-
ous. The manufacturer cannot be held
responsible for unauthorised work.
Ensure power is not supplied to the ap-
pliance while installation or repair work
is being carried out.
The voltage, rated load and fusing are
given on the data plate located beside
the control panel. Ensure these match
the household mains supply.
Connection of this appliance should be
made via a fused connection point
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been built in.
If the point is not accessible after instal
-
lation (depending on country) an addi
-
tional means of disconnection must be
provided for all poles.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA. (In accordance
with DIN VDE 0664, VDE 0100 Section
739).
When switched off there must be an
all-pole contact gap of 3 mm in the iso
-
lator switch (including switch, fuses and
relays acc. to EN 60 335).
Important U.K.
This appliance is supplied with a 3-core
cable (approx. 1.5 m long) for connec
-
tion to a single phase 230-240 V 50 Hz
supply.
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
In other countries check these details
with your supplier.
WARNING:
THIS APPLIANCE MUST BE
EARTHED
The electrical safety of this appli
-
ance can only be guaranteed when
continuity is complete between the
appliance and an effective earthing
system, which complies with local
and national regulations. It is most
important that this basic safety re
-
quirement is tested by a qualified
electrician. The manufacturer cannot
be held responsible for the conse
-
quences of an inadequate earthing
system (e.g. electric shock).
Electrical connection
52
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele GWS 4.6-29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele GWS 4.6-29 in the language / languages: Dutch as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info