105651
14
Zoom out
Zoom in
Previous page
1/68
Next page
Programming the water hardness
level
^ Switch the dishwasher off using the
On/Off button (13).
^ Press the $ (19) and Start/Stop (17)
buttons in and whilst doing so
press
the On/Off button (13) to switch the
dishwasher on.
Then release these buttons.
The Wash/Rinse indicator light (16) and
the fifth programme indicator light * (14)
(factory setting) will come on and the
Salt indicator light (15) will flash.
If this is not the case the process must
be repeated.
* The programme settings on the control panel
run from top to bottom.
Setting the machine for water hardness
level 0.2 – 6.3 mmol/l (1°d - 35°d):
^ Use the programme buttons (19) to
select the programme that
corresponds to your water hardness
level (see Table 1).
The indicator light next to the selected
programme (14) will start flashing and
the Wash/Rinses indicator light (16) will
come on.
Table 1:
°d
(German scale)
mmol/l Programme
position
1 - 4 0.2 - 0.7 1
5 - 7 0.9 - 1.3 2
8 - 10 1.4 - 1.8 3
11 - 13 2.0 - 2.3 4
14 - 16 2.5 - 2.9 5
17 - 22 3.1 - 4.0 6
23 - 35 4.1 - 6.3 7
^
Press the Start/Stop button (17) twice.
The programmed water hardness level
is now stored in memory.
^
Switch the dishwasher off using the
On/Off button (13).
Before using for the first time
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele G 893-4 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele G 893-4 Plus in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info