684384

Miele G 7859 WG Gala Grande Manual

51
Zoom out
Zoom in
Previous page
1/56
Next page
Connection to the water inlet
,
Water in the machine must not
be used as drinking water.
–
The machine must be connected to
the water supply in accordance with
local and national water authority
regulations.
–
If the iron content in the water is too
high, there is a risk or corrosion
damage to instruments.
If the chloride content in the water
exceeds 100 mg/l, the risk of
corrosion damage to instruments will
increase considerably.
– This machine is constructed to
comply with German water
regulations (DVGW), and may be
connected to a suitable supply
without an extra non-return valve if
national regulations permit.
In the UK this machine is listed as a
WRAS approved product in the
Water Fittings and Materials
Directory of products which comply
with the Water Fittings Regulations. It
is approved for mains water
connection in fluid categories 4 and
5, when installed using the double
check valves supplied.
–
The water pressure (flow rate) must
be a minimum of 0.5 bar (50 kPa).
If the water pressure (flow rate) is
below 2 bar (200 kPa) the fill time is
automatically extended.
The max. permitted static pressure is
10 bar (1000 kPa).
If the water pressure is not in the
range of 0.5 to 10 bar (50-1000 kPa)
the p / 6 indicator light may come
on and fault code F2 E in the display.
Please contact the Miele Service
Department.
–
The machine is supplied as standard
for connection to a cold and hot
water supply up to a max.
temperature of 70 °C.
The inlet hoses should be connected
to the cold and hot water stopcocks.
If there is no hot water connection
the hot water inlet hose marked red
should also be connected to a cold
water stopcock. In other words both
inlet hoses are connected to the cold
water supply.
–
Stopcocks with 3/4 BSP male thread
are to be provided on site. They
should be easily accessible so that
the water supply can be turned off
when the machine is not in use.
–
The DN 10 inlet hoses are approx.
1.7 m long terminating in a 3/4 inch
female thread. On no account must
the inlet filters be removed.
–
Large surface area filters are
enclosed in the kit supplied with the
machine for installing between the
stopcock and the inlet hose
(see illustration in "Cleaning and
Care - Water inlet").
Plumbing
51
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele G 7859 WG Gala Grande at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele G 7859 WG Gala Grande in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info