684384
50
Zoom out
Zoom in
Previous page
1/56
Next page
,
All electrical work must be
carried out by a suitably qualified
and competent person in
accordance with local and national
safety regulations (BS 7671 in the
UK).
Connection should be made via a
suitable isolator, with an on-off switch
which should be easily accessible for
servicing and maintenance work.
WARNING
THIS APPLIANCE MUST BE
EARTHED
For extra safety it is advisable to
protect the machine with a suitable
residual current device. Contact a
qualified electrician for advice.
The mains connection cable may only
be replaced by an original Miele
spare part or an apppropriate cable
with wire end ferrule.
For technical data see data plate or
wiring diagram supplied.
The machine must only be operated with
the voltage, frequency and fusing shown
on the data plate.
This machine can be converted in
accordance with the conversion
diagram and wiring diagram supplied.
The data plate (with test certification
VDE, DVGW etc.) and conversion key
are located on the rear of the machine
and also behind the plinth panel below
the protective plastic cover.
The wiring diagram is secured to the
inner side of the protective plastic cover.
Removing the plinth panel and the
protective plastic cover:
,
Disconnect the machine from the
mains electricity supply.
^ Holding the plinth panel at both
sides, pull gently outwards from
beneath a and pull it off b.
^ To remove the protective plastic
cover loosen the 2 screws (left and
right) c.
To re-assemble:
^
Refit the protective plastic cover and
the plinth panel in the reverse order
to which they were removed.
See also the installation diagram
supplied.
Bonding connection
There is a screw connection point
marked with the earth symbol (
8)at
the back of the machine, to which the
earth lead must be connected.
Electrical connection
50
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele G 7859 WG Gala Grande at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele G 7859 WG Gala Grande in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info