105605
60
Zoom out
Zoom in
Previous page
1/72
Next page
Installing integrated "i" Dishwashers
Lay the door front with the rear side
facing upwards.
Using a pencil draw a vertical line
down the middle of the door to use
as a guide line.
Draw a horizontal guide line across
the door, at a distance from the lower
edge of the front panel equalling the
previously measured dimension “X” .
The fixing bracket is marked in the
middle
A
.
Lay the bracket on the rear side of
the door front so that the marks
A
in
the middle of the fixing bracket align
with the vertical guide line, and the
lower fixing holes of the bracket are
centrally positioned in the horizontal
guide line (see illustration). Use
strips of adhesive tape to hold the
bracket in this position.
Drill the fixing holes to a depth of
about 10 mm, using a 2.5 mm drill bit.
Secure the bracket to the door using
the screws supplied.
Double check for correct alignment
before building into the recess.
Installing integrated “i” Dishwashers
60
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele G 666 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele G 666 in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info