105605
33
Zoom out
Zoom in
Previous page
1/72
Next page
Programme sequence indication
During the programme the programme
selector switch moves around the dial
to show which stage has been reached:
Pre-wash (not shown)
Wash cycle
–Interim rinse
Final rinse
Drying phase
The programme selector switch re-
mains stationary during the warm-up
phases of the wash and rinse cycle
until the required temperature has been
reached.
Note
Do not finish a programme prematurely.
Important programme stages (e.g. reac-
tivating the water softener) could be
omitted.
A programme is complete only when
the programme selector switch is at the
"End“ position.
You can now open the dishwasher and
unload it. If the dishwasher is left
closed, the drying fan runs on for a few
minutes to avoid condensation.
We recommend this if you do not need
the crockery immediately. This process
does not count as part of the main pro-
gramme time.
The PRE-WASH programme is com-
plete only when the programme selec-
tor switch stops just before the start
point of the "UNIVERSAL PLUS" pro-
gramme.
Programme change
It is possible to change temperature
within a programme e.g. UNIVERSAL
55 ° to UNIVERSAL 65 °.
If changing a programme e. g.
UNIVERSAL PLUS to UNIVERSAL or
from TOP SOLO to another pro-
gramme:
Turn the temperature selector switch
to "0-OFF".
Turn the programme selector switch
clockwise to the required Start point.
With the temperature selector switch
select the required temperature.
Programme interruption
A programme is interrupted as soon as
the door is opened.
If the door is closed again the pro-
gramme will continue from the position
it was at when it was interrupted.
Warning
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely
necessary and exercise caution
when doing so.
Before closing the door leave it ajar
for approx. 20 secs. This will en-
able the temperature in the wash
cabinet to settle. Close the door
firmly making sure that it clicks into
place.
Switching on and off
33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele G 666 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele G 666 in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info