110663
45
Zoom out
Zoom in
Previous page
1/64
Next page
Water nozzle
During the cooling down phase, water
is sprayed into the cooking
compartment from a water nozzle which
is located behind the deflector plate at
the back of the runners on the right
hand side. With prolonged use, this
nozzle can become dirty and will
require descaling.
The nozzle must be descaled if the fault
message F13 appears in the display.
^ Wait until several beeps sound. Now
open the door and remove the food
which is cooking.
Take care as a large amount of
extremely hot steam may escape
when the door is opened. The food
will also be very hot.
^
Leave the appliance to cool down
with the door open.
^
Remove the runners on the
right-hand side (see "Shelf runners").
^
Pull out the nozzle.
^
Descale the nozzle using the Miele
system descaling agent or with a
suitable proprietary descaling agent
following the instructions on the
packaging.
After descaling rinse the nozzle under
fresh running water.
Before replacing the nozzle, all parts of
the appliance which carry water must
be flushed through.
^
Close the door and switch the
appliance on. Select Steam without
pressure P.
^ Set a duration of 1 minute, and press
the Start/Stop button.
^ Wait until the cooling down phase
has been completed (see "At the end
of the cooking duration").
^ Then open the door and replace the
water nozzle and the shelf runners.
The steam oven can now be used
again in the normal way.
If the fault message F13 reappears after
the nozzle has been descaled, contact
the Service Department.
Cleaning and care
45
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele DG 4064 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele DG 4064 L in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele DG 4064 L

Miele DG 4064 L Installation Guide - English - 20 pages

Miele DG 4064 L Installation Guide - German - 20 pages

Miele DG 4064 L User Manual - German - 60 pages

Miele DG 4064 L Installation Guide - Dutch - 20 pages

Miele DG 4064 L User Manual - Dutch - 60 pages

Miele DG 4064 L User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info