529546
58
Zoom out
Zoom in
Previous page
1/64
Next page
Electrical connection GB/ZA
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with local
and national safety regulations.
Installation, repairs and other work by
unqualified persons could be dange
-
rous. The manufacturer cannot be held
responsible for unauthorised work.
Ensure power is not supplied to the ap
-
pliance while installation or repair work
is being carried out.
The voltage, rated load and fuse rating
are given on the data plate. Please en-
sure that these match the household
mains supply.
The appliance must only be opera-
ted when built-in. This is to ensure
that all electrical parts are shielded.
No live parts must be exposed to the
touch.
Connection should be made via a fused
connection unit or a fused plug and a
suitable switched socket and the on/off
switch should be easily accessible after
the appliance has been built in.
If fitted via an isolator this must be done
by a suitably qualified and competent
person in strict accordance with local
and national safety regulations.
If the socket is not accessible after in
-
stallation (depending on country) an
additional means of disconnection must
be provided for all poles.
When switched off there must be an
all-pole contact gap of 3 mm in the iso
-
lator switch (including switch, fuses and
relays in accordance with EN 60 335).
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100, Section
739).
With an RCD of less than 100 mA, the
FI safety switch can sometimes trip if
the appliance is not used for some
time.
Important U.K.
The appliance is supplied with a mains
cable for connection to an a.c. single
phase 240 V (230 V), 50 Hz supply.
If it is necessary to fit or change plugs
the wires in the mains lead are coloured
in accordance with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre
-
spond with the coloured markings iden
-
tifying the terminals in your plug, pro
-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi
-
nal in the plug which is marked with the
letter E or by the earth symbol z or co
-
loured green or green and yellow.
Electrical connection
58
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele DG 163-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele DG 163-2 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele DG 163-2

Miele DG 163-2 User Manual - German - 60 pages

Miele DG 163-2 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info