791679
49
Zoom out
Zoom in
Previous page
1/60
Next page
Installation
*INSTALLATION*
49
aExtraction mode with flat ducting
and DMK150-1 wall box
bRecirculation mode with flat ducting
and DUU600 recirculation box
cPlug&Play operation with DUP150
conversion kit
During Plug&Play operation, ensure
sufficient ventilation of the plinth
area, e.g. through gaps in the plinth
panel.
The cross-section of the openings
must be at least 425cm² in total.
If the floor meets the ground or is
exposed to outside air, the heat
transfer coefficient of the floor must
not exceed 0.5W/(m²K).
The electronic module for vapour
extraction must be switched to
Plug&Play operation, see “Before
using for the first time” – “Setting up
Plug&Play”.
Sealing the gaps
Damage from unsuitable sealant.
Unsuitable sealant can damage
natural stone.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone. Follow the
manufacturer’s instructions.
Use a silicone sealant that is heat-
resistant to at least 160°C to seal the
gap between the downdraft extractor
and worktop (flush-fit installation) or
between the downdraft extractor and
hob (side-by-side installation).
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele DAD 4840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele DAD 4840 in the language / languages: English as an attachment in your email.

The manual is 2.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele DAD 4840

Miele DAD 4840 User Manual - German - 56 pages

Miele DAD 4840 User Manual - Dutch - 56 pages

Miele DAD 4840 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info