791656
73
Zoom out
Zoom in
Previous page
1/80
Next page
Installation
*INSTALLATION*
73
Ducting
If the downdraft extractor is used
at the same time as a heating appli-
ance that relies on oxygen from the
same room, there is a risk of toxic
fumes.
It is essential that the “Warning and
Safety” instructions are observed.
The downdraft extractor should be
installed according to local and na-
tional building regulations. Seek ap-
proval from the building inspector
where necessary.
The downdraft extractor has an exhaust
connection of 222x89mm.
Only use smooth pipes or flexible ex-
haust hoses made from non-flam-
mable materials for exhaust ducting.
To achieve the most efficient air
throughput with the lowest noise
levels, please note the following:
- The cross-section of the ducting
must not be smaller than the cross-
section of the exhaust duct connec-
tion (see “Appliance dimensions”).
- The ducting should be as short and
straight as possible.
- Only use wide radius bends.
- The exhaust ducting must not be
kinked or compressed.
- Ensure that all connections are
strong and airtight.
Remember that any constriction of
the air flow will reduce air throughput
and increase operating noise.
If the exhaust air is to be ducted into
a flue, the ducting must be directed in
the flow direction of the flue.
If ducting is to be laid horizontally it
must be laid with a downwards slop-
ing gradient. This is to ensure that
condensate cannot drain back into
the fan.
If the ducting is to run through rooms,
ceiling space, etc. there may be great
variations in temperature between the
different areas. The problem of con-
densation will need to be addressed.
The ducting will need to be suitably
insulated.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele CSDA 7001 Smartline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele CSDA 7001 Smartline in the language / languages: English as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele CSDA 7001 Smartline

Miele CSDA 7001 Smartline User Manual - German - 80 pages

Miele CSDA 7001 Smartline User Manual - Dutch - 80 pages

Miele CSDA 7001 Smartline User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info