683689

Miele Complete C3 PowerLine - SGDF4 Manual

57
Zoom out
Zoom in
Previous page
1/160
Next page
en
57
If you wish to fit anAirClean
Plus50,Silence AirClean 50 or a
HEPA AirClean 50 filter, see “Repla-
cing one type of exhaust filter with
another”.
Close the filter grille.
Close the dust compartment lid.
Replacing the AirClean Plus 50,
Silence AirClean 50, Active AirClean
50 and HEPA AirClean 50 exhaust fil-
ters (dia. 43 + 44)
Do not use more than one exhaust fil-
ter at a time.
Open the dust compartment lid.
Lift the exhaust filter and remove it.
Insert a new exhaust filter, making it
sure it goes in properly, then press it
down into position.
If you are using exhaust filter c, d or
e, you must also activate the exhaust
filter TimeStrip® change indicator
(dia. 15).
After approx. 10 - 15 seconds, a thin
red line will appear in the left hand side
of the display (dia. 16).
If you wish to fit anAirClean filter,
see “Replacing one type of exhaust
filter with another”.
Close the dust compartment lid.
Replacing one type of exhaust filter
with another (dia. 12)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b AirClean Plus 50 (light blue)
c Silence AirClean 50 (grey)
d Active AirClean 50 (black)
e HEPA AirClean 50 (white)
Do not use more than one exhaust fil-
ter at a time.
When changing the filter, please note
1. If you wish to replace exhaust filter a
with filter b, c, d or e it is essential
that you remove the filter grille before
you fit the new exhaust filter.
If you are using exhaust filter c, d or
e, you must also activate the exhaust
filter TimeStrip® change indicator
(dia. 15).
2. If you wish to replace exhaust filter b,
c, d or e with filter a it is essential
that you also fit the filter grille * (dia.
42).
* Filter grille - see “Optional ac-
cessories”
Maintenance indicator with reset but-
ton (dia. 45)
Some models are fitted with a mainten-
ance indicator.
The indicator lights up after approx. 50
hours of operation, which is equivalent
to about a year of average use. The
level of soiling of the dust compartment
filter and the exhaust filter must be
checked at this point.
If the filters are replaced, the indicator
must be reset. To do this the vacuum
cleaner must be switched on.
… 57 …


Need help? Post your question in this forum.

Forumrules
1

Forum

miele-complete-c3-powerline---sgdf4

Reset search

  • Hi,
    I can no longer find my user manual.
    What are the meaning of the symbols on the top of my miele complete c3 powerline.
    I have one which looks like an ear, that has lit up for some reason,
    Thanks.
    Keith Submitted on 12-4-2023 at 15:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Complete C3 PowerLine - SGDF4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Complete C3 PowerLine - SGDF4 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info