683689

Miele Complete C3 PowerLine - SGDF4 Manual

50
Zoom out
Zoom in
Previous page
1/160
Next page
en
50
Step on the cable rewind foot switch.
The cable will then retract itself into the
vacuum cleaner.
If you do not want the cable to retract
completely into the vacuum cleaner
you can stop it before it does. Take
hold of the end of the cable whilst re-
tracting it and give it a short pull just
before the end.
To switch on and off (dia. 24)
Press the On/Off foot control .
To regulate the suction power
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
The setting selected will light up yellow.
Curtains, fabric
Upholstery, cushions
Cut pile carpets, rugs and run-
ners
Energy-saving vacuuming. This
setting is also very quiet
Loop pile carpet and rugs
Hard flooring and heavily soiled
carpets and rugs
When using the adjustable floorhead,
if the suction seems too high, reduce
the suction until the floorhead is
easier to manoeuvre.
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following suction power se-
lectors.
– Footswitches
– Footswitch with the option of select-
ing interim suction power levels
– Footswitch with Boost function
– Radio-control handle
– Radio-control handle with Boost
function
Foot controls (dia. 25)
The first time the vacuum cleaner is
switched on, the highest setting will be
selected automatically.
After that the vacuum cleaner will
switch on at the setting which was used
previously.
Press the + foot control to select a
higher setting.
Press the - foot control to select a
lower setting.
Footswitch with the option of select-
ing interim suction power levels
Some models also offer the option of
selecting power levels in between the
standard 6 settings.
To activate this function
Press the + footswitch until the max-
imum power level has been reached.
Keep the footswitch pressed, until the
symbol for the lowest power level
starts to flash.
Then release the footswitch.
… 50 …


Need help? Post your question in this forum.

Forumrules
1

Forum

miele-complete-c3-powerline---sgdf4

Reset search

  • Hi,
    I can no longer find my user manual.
    What are the meaning of the symbols on the top of my miele complete c3 powerline.
    I have one which looks like an ear, that has lit up for some reason,
    Thanks.
    Keith Submitted on 12-4-2023 at 15:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Complete C3 PowerLine - SGDF4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Complete C3 PowerLine - SGDF4 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info