683687
3
Zoom out
Zoom in
Previous page
1/124
Next page
de Gebrauchsanweisung Bodenstaubsauger
en Vacuum cleaner operating instructions
fr Mode d'emploi aspirateur traîneau
it Istruzioni d'uso aspirapolvere a traino
nl Gebruiksaanwijzing stofzuigers
M.-Nr. 10 977 240
HS11
2
de ....................................................................................................................... 4
en ....................................................................................................................... 27
fr ......................................................................................................................... 50
it ......................................................................................................................... 73
nl ........................................................................................................................ 95
de - Inhalt
3
Sicherheitshinweise und Warnungen .................................................................. 4
Gerätebeschreibung............................................................................................ 10
Ihr Beitrag zum Umweltschutz........................................................................... 12
Anmerkung zu den Europäischen Verordnungen (EU) Nr. 665/2013 und (EU)
Nr. 666/2013 ......................................................................................................... 13
Abbildungsverweise ............................................................................................ 14
Vor dem Gebrauch............................................................................................... 14
Verwendung des mitgelieferten Zubehörs ....................................................... 16
Gebrauch.............................................................................................................. 16
Abstellen, Transportieren und Aufbewahren .................................................... 17
Wartung................................................................................................................ 18
Bezugsquellen für Staubbeutel und Filter ............................................................. 18
Staubbeutel-Wechselanzeige ............................................................................... 19
Staubbeutel entnehmen ....................................................................................... 19
Staubbeutel einsetzen .......................................................................................... 20
Motorschutzfilter austauschen ............................................................................. 20
Zeitpunkt des Abluftfilterwechsels ........................................................................ 20
Abluftfilter AirClean austauschen ......................................................................... 21
Abluftfilter AirClean Plus 50, Active AirClean 50 und HEPA AirClean 50 austau-
schen .................................................................................................................... 21
Abluftfilter umrüsten ............................................................................................. 21
Fadenheber austauschen ..................................................................................... 22
Laufrolle der Bodendüse AllTeQ reinigen ............................................................. 22
Pflege.................................................................................................................... 22
Was tun, wenn ... ................................................................................................. 23
Kundendienst....................................................................................................... 24
Kontakt bei Störungen .......................................................................................... 24
Garantie................................................................................................................. 24
Nachkaufbares Zubehör ..................................................................................... 24
de - Sicherheitshinweise und Warnungen
4
Dieser Staubsauger entspricht den vorgeschriebenen Si-
cherheitsbestimmungen. Ein unsachgemäßer Gebrauch
kann zu Schäden an Personen und Sachen führen.
Lesen Sie vor dem ersten Gebrauch des Staubsaugers
die Gebrauchsanweisung. Sie gibt wichtige Hinweise für
Sicherheit, Gebrauch und Wartung des Staubsaugers.
Dadurch schützen Sie sich und andere und vermeiden
Schäden.
Bewahren Sie die Gebrauchsanweisung auf und geben
Sie diese an einen eventuellen Nachbesitzer weiter.
Schalten Sie den Staubsauger immer nach dem Ge-
brauch, vor jedem Zubehörwechsel und vor jeder Reini-
gung/Wartung aus. Ziehen Sie den Netzstecker aus der
Steckdose.
Bestimmungsgemäße Verwendung
Dieser Staubsauger ist dazu bestimmt, im Haushalt und
in haushaltsähnlichen Umgebungen verwendet zu werden.
Dieser Staubsauger ist für das tägliche Saugen von Tep-
pichen, Teppichböden und unempfindlichen Hartböden ge-
eignet.
Dieser Staubsauger ist nicht für den Gebrauch im Au-
ßenbereich bestimmt.
Dieser Staubsauger ist für die Verwendung bis zu einer
Höhe von 4000 m über dem Meeresspiegel bestimmt.
de - Sicherheitshinweise und Warnungen
5
Benutzen Sie den Staubsauger ausschließlich zum Auf-
saugen von trockenem Sauggut. Menschen und Tiere dür-
fen Sie mit dem Staubsauger nicht absaugen. Alle anderen
Anwendungsarten, Umbauten und Veränderungen sind un-
zulässig.
Personen, die aufgrund ihrer physischen, sensorischen
oder geistigen Fähigkeiten oder ihrer Unerfahrenheit oder
Unkenntnis nicht in der Lage sind, den Staubsauger sicher
zu bedienen, dürfen diesen Staubsauger nicht ohne Auf-
sicht oder Anweisung durch eine verantwortliche Person
benutzen.
Kinder im Haushalt
Erstickungsgefahr! Kinder können sich beim Spielen in
Verpackungsmaterial (z.B. Folien) einwickeln oder es sich
über den Kopf ziehen und ersticken. Halten Sie Verpa-
ckungsmaterial von Kindern fern.
Kinder unter 8 Jahren müssen vom Staubsauger fernge-
halten werden, es sei denn, sie werden ständig beaufsich-
tigt.
Kinder ab 8 Jahren dürfen den Staubsauger nur ohne
Aufsicht bedienen, wenn ihnen der Staubsauger so erklärt
wurde, dass sie diesen sicher bedienen können. Kinder
müssen mögliche Gefahren einer falschen Bedienung er-
kennen und verstehen können.
Kinder dürfen den Staubsauger nicht ohne Aufsicht rei-
nigen oder warten.
de - Sicherheitshinweise und Warnungen
6
Beaufsichtigen Sie Kinder, die sich in der Nähe des
Staubsaugers aufhalten. Lassen Sie Kinder niemals mit
dem Staubsauger spielen.
Technische Sicherheit
Kontrollieren Sie den Staubsauger und alle Zubehörteile
vor der Benutzung auf sichtbare Schäden. Nehmen Sie
einen beschädigten Staubsauger nicht in Betrieb.
Vergleichen Sie die Anschlussdaten auf dem Typen-
schild des Staubsaugers (Netzspannung und Frequenz) mit
denen des Elektronetzes. Diese Daten müssen unbedingt
übereinstimmen. Der Staubsauger ist ohne Änderung ge-
eignet für 50 Hz oder 60 Hz.
Die Netzsteckdose muss über eine Sicherung 16 A oder
10 A träge abgesichert sein.
Der zuverlässige und sichere Betrieb dieses Staubsau-
gers ist nur dann gewährleistet, wenn der Staubsauger am
öffentlichen Stromnetz angeschlossen ist.
Eine Reparatur des Staubsaugers während der Garantie-
zeit darf nur von einem von Miele autorisierten Kunden-
dienst ausgeführt werden, da sonst bei nachfolgenden
Schäden kein Garantieanspruch besteht.
de - Sicherheitshinweise und Warnungen
7
Benutzen Sie das Anschlusskabel nicht zum Tragen des
Staubsaugers und ziehen Sie den Netzstecker nicht am
Anschlusskabel aus der Steckdose. Ziehen Sie das An-
schlusskabel nicht über scharfe Kanten und quetschen Sie
es nicht ein. Vermeiden Sie häufiges Überfahren des An-
schlusskabels. Anschlusskabel, Netzstecker und Steckdo-
se können dabei beschädigt werden und Ihre Sicherheit
gefährden.
Benutzen Sie den Staubsauger nicht, wenn das An-
schlusskabel beschädigt ist. Lassen Sie ein beschädigtes
Anschlusskabel nur komplett mit der Kabeltrommel aus-
tauschen. Aus Sicherheitsgründen darf der Austausch nur
von einer von Miele autorisierten Fachkraft oder vom Miele
Kundendienst vorgenommen werden.
Beim Saugen – vor allem von Feinstaub, wie z.B. Bohr-
staub, Sand, Gips, Mehl usw. – kommt es naturgemäß zu
elektrostatischen Aufladungen, die sich entladen können.
Um die unangenehme Wirkung der elektrostatischen Entla-
dungen zu vermeiden, ist an der Unterseite des Handgrif-
fes ein Metallstreifen als Ableitvorrichtung eingearbeitet.
Achten Sie beim Saugen darauf, dass Ihre Hand diesen
Metallstreifen immer berührt.
Tauchen Sie den Staubsauger niemals in Wasser und
reinigen Sie ihn nur trocken oder mit einem leicht feuchten
Tuch.
Lassen Sie Reparaturen nur von einer von Miele autori-
sierten Fachkraft ausführen. Durch unsachgemäße Repara-
turen können erhebliche Gefahren für den Benutzer entste-
hen.
de - Sicherheitshinweise und Warnungen
8
Nur bei Originalersatzteilen gewährleistet Miele, dass sie
die Sicherheitsanforderungen erfüllen. Defekte Bauteile
dürfen nur gegen solche ausgetauscht werden.
Sachgemäßer Gebrauch
Benutzen Sie den Staubsauger nicht ohne Staubbeutel,
Motorschutzfilter und Abluftfilter.
Wenn kein Staubbeutel eingesetzt ist, kann der Staub-
raumdeckel nicht geschlossen werden. Wenden Sie keine
Gewalt an.
Saugen Sie keine brennenden oder glühenden Gegen-
stände, wie z.B. Zigaretten oder scheinbar erloschene
Asche bzw. Kohle, auf.
Saugen Sie keine Flüssigkeiten und keinen feuchten
Schmutz auf. Lassen Sie feucht gereinigte oder schampu-
nierte Teppiche und Teppichböden vor dem Absaugen voll-
ständig trocknen.
Saugen Sie keinen Tonerstaub auf. Toner, der z.B. bei
Druckern oder Kopiergeräten verwendet wird, kann elek-
trisch leitfähig sein.
Saugen Sie keine leicht entflammbaren oder explosiven
Stoffe oder Gase auf und saugen Sie nicht an Orten, an
denen solche Stoffe gelagert sind.
Vermeiden Sie mit dem Saugstrom in Kopfnähe zu kom-
men.
de - Sicherheitshinweise und Warnungen
9
Zubehör
Fassen Sie beim Saugen mit einer Miele Turbobürste
nicht in die laufende Bürstenwalze.
Achten Sie beim Saugen mit dem Handgriff ohne aufge-
stecktes Zubehör darauf, dass der Handgriff nicht beschä-
digt ist.
Verwenden Sie nur Staubbeutel, Filter und Zubehör mit
dem „ORIGINAL Miele“-Logo. Nur dafür kann der Herstel-
ler die Sicherheit gewährleisten.
Miele haftet nicht für Schäden, die durch bestimmungs-
widrigen Gebrauch, falsche Bedienung und infolge von
Nichtbeachtung der Sicherheitshinweise und Warnungen
verursacht werden.
de - Gerätebeschreibung
10
de - Gerätebeschreibung
11
a
Handgriff
b
Nebenluftsteller
c
Entriegelungstasten *
d
Verbindungsstück für Aufbewahrung *
e
Teleskoprohr *
f
EasyLock Saugrohr *
g
Verstellknopf für Teleskoprohr *
h
Saugstutzen
i
Entriegelungstaste für Staubraumdeckel
j
Motorschutzfilter
k
Original Miele Staubbeutel
l
Bodendüse *
m
Tragegriff
n
Parksystem zur Aufbewahrung (an beiden Seiten des Staubsaugers)
o
Original Miele Abluftfilter *
p
Fußtaste für automatische Kabelaufwicklung
q
Anschlusskabel
r
Drehregler
s
Parksystem für Saugpausen
t
Fußtaste Ein/Aus
u
Entriegelungstaste für Zubehörfach
v
Staubbeutel-Wechselanzeige
w
Saugschlauch
* je nach Modell sind diese Ausstattungsmerkmale in ihrer Ausführung unter-
schiedlich bzw. nicht vorhanden.
de - Ihr Beitrag zum Umweltschutz
12
Entsorgung der Transportver-
packung
Die Verpackung schützt das Gerät vor
Transportschäden. Die Verpackungsma-
terialien sind nach umweltverträglichen
und entsorgungstechnischen Gesichts-
punkten ausgewählt und deshalb recy-
celbar.
Das Rückführen der Verpackung in den
Materialkreislauf spart Rohstoffe und
verringert das Abfallaufkommen. Ihr
Fachhändler nimmt die Verpackung zu-
rück.
Entsorgung der Staubbeutel
und der eingesetzten Filter
Staubbeutel und Filter sind aus umwelt-
verträglichen Materialien hergestellt. Die
Filter können Sie über den normalen
Hausmüll entsorgen. Dies trifft auch auf
den Staubbeutel zu, sofern er keinen im
Hausmüll verbotenen Schmutz enthält.
Entsorgung des Altgerätes
Entnehmen Sie vor der Entsorgung des
Altgerätes den Staubbeutel und die ein-
gesetzten Filter und geben Sie diese
Teile in den Hausmüll.
Elektro- und Elektronikgeräte enthalten
vielfach wertvolle Materialien. Sie ent-
halten auch bestimmte Stoffe, Gemi-
sche und Bauteile, die für ihre Funktion
und Sicherheit notwendig waren. Im
Hausmüll sowie bei nicht sachgemäßer
Behandlung können sie der menschli-
chen Gesundheit und der Umwelt scha-
den. Geben Sie Ihr Altgerät deshalb auf
keinen Fall in den Hausmüll.
Nutzen Sie stattdessen die offiziellen,
eingerichteten Sammel- und Rücknah-
mestellen zur Abgabe und Verwertung
der Elektro- und Elektronikgeräte bei
Kommune, Händler oder Miele. Für das
Löschen etwaiger personenbezogener
Daten auf dem zu entsorgenden Altge-
rät sind Sie gesetzmäßig eigenverant-
wortlich. Bitte sorgen Sie dafür, dass Ihr
Altgerät bis zum Abtransport kindersi-
cher aufbewahrt wird.
de
13
Anmerkung zu den Europäi-
schen Verordnungen (EU) Nr.
665/2013 und (EU) Nr. 666/2013
Dieser Staubsauger ist ein Haushalts-
staubsauger und nach oben genannten
Verordnungen als Universalstaubsauger
eingestuft.
Diese Gebrauchsanweisung, das zum
Staubsauger zugehörige EU-Datenblatt
sowie das zugehörige Online Energie-
effizienzlabel stehen zum Download auf
der Miele Internetseite unter www.mie-
le.com bereit.
Der im Datenblatt und auf dem Energie-
effizienzlabel genannte jährliche Ener-
gieverbrauch beschreibt den indikati-
ven, jährlichen Energieverbrauch (kWh
pro Jahr), basierend auf 50 Reinigungs-
vorgängen. Der tatsächliche Energiever-
brauch hängt davon ab, wie von dem
Staubsauger Gebrauch gemacht wird.
Alle in den oben genannten Verordnun-
gen durchzuführenden Prüfungen und
Berechnungen wurden nach den fol-
genden, jeweils gültigen, harmonisierten
Normen unter Berücksichtigung des zu
den Verordnungen veröffentlichten Leit-
fadens der Europäischen Kommission
aus September 2014 durchgeführt:
a) EN 60312-1 Vacuum cleaners for
household use - Part 1: Dry vacuum
cleaners - Methods for measuring the
performance
b) EN 60704-2-1 Household and similar
electrical appliances - Test code for the
determination of airborne acoustical
noise - Part 2-1: Particular requirements
for vacuum cleaners
c) EN 60335-2-2 Household and similar
electrical appliances - Safety - Part 2-2:
Particular requirements for vacuum
cleaner and water suction appliances
Nicht alle dem Staubsauger beiliegen-
den Bodendüsen und Saugzubehöre
sind für den in den Verordnungen be-
schriebenen Einsatz zur intensiven Rei-
nigung von Teppichen oder Hartböden
bestimmt. Folgende Bodendüsen und
Einstellungen wurden zur Ermittlung der
Werte verwendet:
Für die Energieverbräuche und die Rei-
nigungsklassen auf Teppich und Hart-
boden sowie den Geräuschwert auf
Teppich wurde die umschaltbare Bo-
dendüse mit versenkten Borsten ge-
nutzt (Drücken Sie die Fußtaste ).
Wenn Ihrem Staubsauger serienmäßig
eine Intensivdüse SID beiliegt, so wurde
diese Bodendüse zur Ermittlung der
Werte genutzt.
Wenn Ihrem Staubsauger serienmäßig
eine Ritzendüse SRD beiliegt, so wurde
diese, speziell für die Hartbodenreini-
gung entwickelte Bodendüse, zur Er-
mittlung der oben genannten Werte auf
Hartboden genutzt.
Die Angaben auf dem EU-Datenblatt
und dem Energieeffizienzlabel beziehen
sich ausschließlich auf die hier angege-
benen Kombinationen und Einstellun-
gen der Bodendüsen auf den unter-
schiedlichen Bodenbelägen.
Für alle Messungen wurden ausschließ-
lich Original Miele Staubbeutel, Motor-
schutzfilter und Abluftfilter verwendet.
de
14
Abbildungsverweise
Die in den Kapiteln angegebenen Ab-
bildungen finden Sie auf den Aus-
klappseiten am Ende dieser Ge-
brauchsanweisung.
Vor dem Gebrauch
Saugschlauch anschließen (Abb. 01)
Stecken Sie den Saugstutzen bis zum
deutlichen Einrasten in die Saugöff-
nung des Staubsaugers. Führen Sie
dazu die Einführhilfen beider Teile
aufeinander zu.
Saugschlauch abnehmen (Abb. 02)
Drücken Sie die Entriegelungstasten
seitlich am Saugstutzen und ziehen
Sie ihn aus der Saugöffnung.
Saugschlauch und Handgriff zusam-
menstecken (Abb. 03)
Stecken Sie den anderen Anschluss-
stutzen des Saugschlauches bis zum
deutlichen Einrasten in den Handgriff.
Je nach Modell verfügt Ihr Staubsauger
über eines der folgenden Saugrohre.
EasyLock Saugrohre
Teleskoprohr
Comfort Teleskoprohr
EasyLock Saugrohre zusammenste-
cken (Abb. 04)
Nehmen Sie das Saugrohr mit dem
Verbindungsstück und stecken Sie es
nach links und rechts drehend in das
zweite Saugrohr, bis die Verriegelung
deutlich einrastet.
Schieben Sie das Verbindungsstück
bis zum Einrasten nach oben.
Handgriff und Saugrohr zusammen-
stecken (Abb. 05 + 06)
Stecken Sie den Handgriff bis zum
deutlichen Einrasten in das Saugrohr.
Führen Sie dazu die Einführhilfen bei-
der Teile aufeinander zu.
Handgriff abnehmen
Drücken Sie die Entriegelungstaste,
wenn Sie die Teile voneinander tren-
nen möchten und ziehen Sie den
Handgriff mit einer leichten Drehung
aus dem Saugrohr.
Teleskoprohr einstellen (Abb. 07)
Das Teleskoprohr besteht aus zwei in-
einander gesteckten Rohrteilen, die Sie
zum Saugen auf die jeweils bequemste
Länge auseinander ziehen können.
Drücken Sie den Verstellknopf und
stellen Sie das Teleskoprohr auf die
gewünschte Länge ein.
Comfort Teleskoprohr einstellen
(Abb. 07)
Das Comfort Teleskoprohr besteht aus
zwei ineinander gesteckten Rohrteilen,
die Sie zum Saugen auf die jeweils be-
quemste Länge auseinander ziehen
können.
Umfassen Sie die Entriegelung und
stellen Sie das Teleskoprohr auf die
gewünschte Länge ein.
Saugrohr und umschaltbare Boden-
düse zusammenstecken (Abb. 08)
Stecken Sie das Saugrohr nach links
und rechts drehend in die Bodendü-
se, bis es deutlich einrastet.
de
15
Drücken Sie die Entriegelungstaste,
wenn Sie die Teile voneinander tren-
nen möchten und ziehen Sie das
Saugrohr mit einer leichten Drehung
aus der Bodendüse.
Umschaltbare Bodendüse einstellen
(Abb. 09, 10 + 11)
Dieser Staubsauger ist für das tägliche
Saugen von Teppichen, Teppichböden
und unempfindlichen Hartböden geeig-
net.
Das Miele Bodenpflege Sortiment bietet
für andere Bodenbeläge oder Spezial-
anwendungen passende Bodendüsen,
-bürsten und -vorsätze (siehe Kapitel
„Nachkaufbares Zubehör“).
Beachten Sie in erster Linie die Rei-
nigungs- und Pflegeanweisung Ihres
Bodenbelagherstellers.
Saugen Sie unempfindliche ebene Hart-
böden und Böden mit Fugen mit her-
ausgestellten Borsten:
Drücken Sie die Fußtaste .
Kurzzeitige Reinigung dieser Böden und
Saugen von Teppichen und Teppichbö-
den mit versenkten Borsten:
Drücken Sie die Fußtaste .
Wenn Ihnen die Schiebekraft der um-
schaltbaren Bodendüse zu hoch er-
scheint, so reduzieren Sie die Saug-
leistung, bis sich die Bodendüse
leicht schieben lässt (siehe Kapitel
„Gebrauch - Saugleistung wählen“).
Verwendung der Intensivdüse SID
(je nach Modell)
Beachten Sie in erster Linie die Rei-
nigungs- und Pflegeanweisung Ihres
Bodenbelag-Herstellers.
Die Intensivdüse ist speziell für das
kurzzeitige Saugen von Teppichen und
Böden mit tiefen Fugen und Ritzen ge-
eignet.
Für den Dauereinsatz empfehlen wir
die Nutzung der umschaltbaren Bo-
dendüse.
Aktivierung der Abluftfilter-Wechsel-
anzeige timestrip® am Abluftfilter
Je nach Modell ist serienmäßig einer
der folgenden Abluftfilter eingesetzt
(Abb. 12).
a AirClean
b AirClean Plus 50 (hellblau)
c Active AirClean 50 (schwarz)
d HEPA AirClean 50 (weiß)
Wenn Ihr Staubsauger mit einem Abluft-
filter c oder d ausgestattet ist, so müs-
sen Sie die Abluftfilter-Wechselanzeige
timestrip® aktivieren.
Drücken Sie die Entriegelungstaste in
der Griffmulde und klappen Sie den
Staubraumdeckel bis zum Einrasten
nach oben auf (Abb. 13).
Entfernen Sie den Hinweisstreifen
(Abb. 14).
Drücken Sie die Abluftfilter-Wechsel-
anzeige timestrip®(Abb. 15).
Nach ca. 10-15 Sekunden erscheint am
linken Rand des Anzeigefeldes ein
schmaler roter Farbstreifen (Abb. 16).
de
16
Schließen Sie den Staubraumdeckel
bis zum Einrasten der Verriegelung
und achten Sie darauf, dass der
Staubbeutel dabei nicht eingeklemmt
wird.
Funktion der Abluftfilter-Wechselan-
zeige timestrip®
Die Abluftfilter-Wechselanzeige time-
strip® zeigt die Nutzungsdauer des Ab-
luftfilters an. Nach ca. 50 Betriebsstun-
den ist das Anzeigefeld rot ausgefüllt
(Abb. 17). 50 Betriebsstunden entspre-
chen ungefähr der durchschnittlichen
Nutzung eines Jahres.
Verwendung des mitgelieferten
Zubehörs (Abb. 18)
Fugendüse
Saugpinsel
Polsterdüse
Einzelne Modelle sind serienmäßig mit
einem der folgenden Zubehörteile aus-
gestattet, die nicht abgebildet sind.
Bodendüse AllergoTeQ
Turbobürste
Diesen Staubsaugern liegt eine separa-
te Gebrauchsanweisung des entspre-
chenden Zubehörteils bei.
Zubehör entnehmen (Abb. 19)
Drücken Sie die Entriegelungstaste.
Das Zubehörfach öffnet sich.
Entnehmen Sie das gewünschte Zu-
behörteil.
Schließen Sie das Zubehörfach, in-
dem Sie den Deckel zudrücken.
Umschaltbare Bodendüse (Abb. 20)
Die umschaltbare Bodendüse ist auch
zum Absaugen von Treppenstufen ge-
eignet.
Saugen Sie Treppen aus Sicher-
heitsgründen von unten nach oben
ab.
Gebrauch
Anschlusskabel herausziehen
(Abb. 21)
Ziehen Sie das Anschlusskabel bis
zur gewünschten Länge heraus.
Stecken Sie den Netzstecker in die
Steckdose.
Das Anschlusskabel müssen Sie
bei einer Betriebszeit von länger als
30 Minuten komplett herausziehen.
Gefahr der Überhitzung und Schädi-
gung.
Aufrollen (Abb. 22)
Ziehen Sie den Netzstecker aus der
Steckdose.
Treten Sie die Fußtaste für die auto-
matische Kabelaufwicklung – das An-
schlusskabel rollt automatisch auf.
Ein- und Ausschalten (Abb. 23)
Treten Sie die Fußtaste Ein/Aus .
Saugleistung wählen (Abb. 24)
Sie können die Saugleistung des Staub-
saugers der jeweiligen Saugsituation
anpassen. Durch Reduzierung der
Saugleistung verringern Sie die Schie-
bekraft an der Bodendüse deutlich.
de
17
Am Staubsauger sind den Leistungsstu-
fen Symbole zugeordnet, die beispiel-
haft zeigen, wofür die jeweilige Leis-
tungsstufe zu empfehlen ist.
Gardinen, Textilien
Polstermöbel, Kissen
hochwertige Veloursteppiche,
Brücken und Läufer
energiesparendes tägliches Sau-
gen bei geringer Geräuschent-
wicklung
Teppiche und Teppichböden aus
Schlingenware
Hartböden, stark verschmutzte
Teppiche und Teppichböden
Wenn Sie die umschaltbare Boden-
düse nutzen und Ihnen dabei die
Schiebekraft zu hoch erscheint, so
reduzieren Sie die Saugleistung, bis
sich diese Bodendüse leicht schie-
ben lässt.
Drehen Sie den Saugleistungswähler
auf die gewünschte Leistungsstufe.
Nebenluftsteller öffnen (Abb. 25)
Sie können die Saugleistung kurzzeitig
reduzieren, z.B. um ein Festsaugen an
textilen Bodenbelägen zu verhindern.
Öffnen Sie den Nebenluftsteller am
Handgriff nur so weit, bis sich die
Saugdüse leicht bewegen lässt.
Dadurch verringert sich die Schiebekraft
an der jeweils verwendeten Saugdüse.
Beim Saugen
Ziehen Sie den Staubsauger beim
Saugen wie einen Schlitten hinter
sich her. Sie können den Staubsauger
auch aufrecht stehend benutzen, z.B.
beim Absaugen von Treppen oder
Gardinen.
Beim Saugen – vor allem von
Feinstaub, wie z.B. Bohrstaub,
Sand, Gips, Mehl usw. – kommt es
naturgemäß zu elektrostatischen
Aufladungen, die sich entladen kön-
nen. Um die unangenehme Wirkung
der elektrostatischen Entladungen zu
vermeiden, ist an der Unterseite des
Handgriffes ein Metallstreifen als Ab-
leitvorrichtung eingearbeitet. Achten
Sie beim Saugen darauf, dass Ihre
Hand diesen Metallstreifen immer
berührt(Abb. 26).
Abstellen, Transportieren und
Aufbewahren
Parksystem für Saugpausen (Abb. 27)
In kurzen Saugpausen können Sie das
Saugrohr mit der Bodendüse bequem
am Staubsauger abstellen.
Stecken Sie die Bodendüse mit dem
Parknocken in das Parksystem.
Wenn sich der Staubsauger hierbei
auf einer schrägen Fläche befindet,
z.B. auf einer Rampe, so
- schieben Sie die Rohrteile des Tele-
skoprohres komplett ein
- nutzen Sie das Parksystem nicht,
wenn Ihr Staubsauger mit einem Ea-
syLock Saugrohr ausgestattet ist.
de
21
Abluftfilter AirClean austauschen
(Abb. 34 + 35)
Achten Sie darauf, dass immer nur ein
Abluftfilter eingesetzt ist.
Öffnen Sie den Staubraumdeckel.
Drücken Sie die Entriegelung des Fil-
tergitters zusammen und öffnen Sie
das Filtergitter bis zum Einrasten.
Nehmen Sie den verbrauchten Abluft-
filter AirClean an einer der beiden
sauberen Hygieneflächen heraus.
Legen Sie den neuen Abluftfilter
AirClean ein.
Wenn Sie einen Abluftfilter AirClean
Plus50,Active AirClean 50 oder HE-
PA AirClean 50 einsetzen möchten,
so beachten Sie dazu das Kapitel
„Abluftfilter umrüsten“.
Schließen Sie das Filtergitter.
Schließen Sie den Staubraumdeckel.
Abluftfilter AirClean Plus 50,
Active AirClean 50 und
HEPA AirClean 50 austauschen
(Abb. 36 + 37)
Achten Sie darauf, dass immer nur ein
Abluftfilter eingesetzt ist.
Öffnen Sie den Staubraumdeckel.
Heben Sie den Abluftfilter an und ent-
nehmen Sie den Abluftfilter.
Setzen Sie den neuen Abluftfilter
passgenau ein und drücken Sie den
Abluftfilter nach unten.
Drücken Sie bei Verwendung des Ab-
luftfilters c oder d die Abluftfilter-
Wechselanzeige timestrip®(Abb. 15).
Nach ca. 10-15 Sekunden erscheint am
linken Rand des Anzeigefeldes ein
schmaler roter Farbstreifen (Abb. 16).
Wenn Sie einen Abluftfilter AirClean
einsetzen möchten, so beachten Sie
dazu das Kapitel „Abluftfilter umrüs-
ten“.
Schließen Sie den Staubraumdeckel.
Abluftfilter umrüsten (Abb. 12)
Je nach Modell ist serienmäßig einer
der folgenden Abluftfilter eingesetzt:
a AirClean
b AirClean Plus 50 (hellblau)
c Active AirClean 50 (schwarz)
d HEPA AirClean 50 (weiß)
Achten Sie darauf, dass immer nur ein
Abluftfilter eingesetzt ist.
Beim Umrüsten beachten
1. Wenn Sie anstelle eines Abluftfilters a
einen Abluftfilter b, c oder d einset-
zen, so müssen Sie zusätzlich das
Filtergitter herausnehmen und dafür
den entsprechenden neuen Abluftfil-
ter einsetzen.
Außerdem müssen Sie bei Verwen-
dung eines Abluftfilters c oder d die
Abluftfilter-Wechselanzeige time-
strip® aktivieren (Abb. 15).
de
22
2. Wenn Sie anstelle des Abluftfilters b,
c oder d einen Abluftfilter a einset-
zen, so müssen Sie diesen Abluftfilter
a unbedingt in ein Filtergitter * einle-
gen (Abb. 35).
* Filtergitter - siehe Kapitel „Nach-
kaufbares Zubehör
Fadenheber austauschen
(Abb. 38 + 39)
(nicht möglich bei Modellen mit Boden-
düse EcoTeQ Plus)
Die Fadenheber am Saugmund der Bo-
dendüse sind austauschbar. Erneuern
Sie die Fadenheber, wenn der Flor ver-
schlissen ist.
Heben Sie die Fadenheber aus den
Einsteckschlitzen. Verwenden Sie da-
zu z.B. einen Schlitzschraubendre-
her.
Ersetzen Sie die Fadenheber durch
neue Fadenheber.
Laufrolle der Bodendüse AllTeQ reini-
gen (Abb. 40)
Reinigen Sie die Laufrolle der Bodendü-
se bei Bedarf.
Entriegeln Sie die Rollenachse mit ei-
ner Münze.
Drücken Sie die Rollenachse heraus
und entnehmen Sie die Rollenachse.
Entnehmen Sie die Laufrolle.
Entfernen Sie Fäden und Haare, set-
zen Sie die Laufrolle wieder ein und
verriegeln Sie die Rollenachse.
Ersatzteile bekommen Sie bei Ihrem
Miele Fachhändler oder über den
Miele Kundendienst.
Pflege
Schalten Sie den Staubsauger
vor jeder Reinigung aus und ziehen
Sie den Netzstecker aus der Steck-
dose.
Staubsauger und Zubehörteile
Pflegen Sie den Staubsauger und alle
Zubehörteile aus Kunststoff mit einem
handelsüblichen Kunststoffreiniger.
Verwenden Sie keine Scheuer-
mittel, keine Glas- oder Allzweckrei-
niger und keine ölhaltigen Pflegemit-
tel!
Staubraum
Saugen Sie den Staubraum mit einem
zweiten Staubsauger aus oder reinigen
Sie den Staubraum mit einem tro-
ckenen Staubtuch oder Staubpinsel.
Tauchen Sie den Staubsauger
niemals in Wasser! Feuchtigkeit im
Staubsauger birgt die Gefahr eines
elektrischen Schlages.
de
23
Was tun, wenn ...
Sie können die meisten Störungen und Fehler, zu denen es im täglichen Betrieb
kommen kann, selbst beheben. In vielen Fällen können Sie Zeit und Kosten spa-
ren, da Sie nicht den Kundendienst rufen müssen.
Die nachfolgenden Tabellen sollen Ihnen dabei helfen, die Ursachen einer Störung
oder eines Fehlers zu finden und zu beseitigen.
Problem Ursache und Behebung
Der Staubsauger schal-
tet selbsttätig ab.
Wenn der Staubsauger zu warm wird, schaltet ein
Temperaturbegrenzer den Staubsauger aus.
Die Störung kann auftreten, wenn z.B. sperriges
Sauggut die Saugwege verstopft, der Staubbeutel voll
oder durch Feinstaub verstopft ist oder der Motor-
schutzfilter/Abluftfilter stark verschmutzt ist.
Schalten Sie den Staubsauger mit der Fußtaste
Ein/Aus aus und ziehen Sie den Netzstecker
aus der Steckdose.
Nach Beseitigung der Ursache und einer Wartezeit
von ca. 20-30 Minuten, hat sich der Staubsauger so
weit abgekühlt, dass Sie den Staubsauger wieder ein-
schalten und benutzen können.
de
24
Kundendienst
Kontakt bei Störungen
Bei Störungen, die Sie nicht selbst be-
heben können, benachrichtigen Sie Ih-
ren Miele Fachhändler oder den Miele
Kundendienst.
Die Telefonnummer des Miele Kun-
dendienstes finden Sie am Ende die-
ses Dokumentes.
Garantie
Die Garantiezeit beträgt 2 Jahre.
Weitere Informationen zu den Garantie-
bedingungen in Ihrem Land erhalten Sie
beim Miele Kundendienst.
Nachkaufbares Zubehör
Einzelne Modelle sind bereits serien-
mäßig mit einem oder mehreren der
folgenden Zubehörteile ausgestattet.
Beachten Sie in erster Linie die Rei-
nigungs- und Pflegeanweisung Ihres
Bodenbelagherstellers.
Sie können diese und viele weitere Pro-
dukte über den Miele Webshop, den
Miele Kundendienst oder Ihren Miele
Fachhändler beziehen.
Bodendüsen/-bürsten
Bodendüse AllergoTeQ
(SBDH 285-3)
Zur täglichen hygienischen Reinigung
aller Bodenbeläge. Beim Saugen wird
der Reinigungsfortschritt über ein Farb-
display (Ampelanzeige) sichtbar.
Turbobürste TurboTeQ (STB 305-3) /
Turbobürste Turbo (STB 205-3)
Zur Aufnahme von Fasern und Haaren
von kurzflorigen textilen Bodenbelägen.
Bodenbürste Hardfloor (SBB 235-3)
Zum Absaugen strapazierfähiger ebener
Hartböden.
Bodenbürste Hardfloor Twister mit
Drehgelenk (SBB 300-3)
Zum Absaugen ebener Hartbodenflä-
chen und kleiner Nischen.
Bodenbürste Parquet Twister mit
Drehgelenk (SBB 300-3)
Mit Naturborsten, zum Absaugen ebe-
ner Hartbodenflächen und kleiner Ni-
schen.
Bodenbürste Parquet Twister XL mit
Drehgelenk (SBB 400-3)
Mit Naturborsten, zum schnellen Ab-
saugen großer ebener Hartbodenflä-
chen und kleiner Nischen.
Sonstiges Zubehör
Zubehörkoffer MicroSet (SMC 20)
Zubehör für die Reinigung kleiner Ge-
genstände und schwer zugänglicher
Stellen, wie z.B. Stereoanlagen, Tasta-
turen, Modellbau.
Handturbobürste Turbo XS (STB 20) /
Handturbobürste Turbo Mini (STB
101)
Zum Saugbürsten von Polstermöbeln,
Matratzen oder Autositzen.
Universalbürste (SUB 20)
Zum Absaugen von Büchern, Regalbö-
den und Ähnlichem.
de
25
Lamellen-/Heizkörperbürste (SHB 30)
Zum Entstauben von Heizkörperrippen,
schmalen Regalen oder Fugen.
Matratzendüse (SMD 10)
Zum bequemen Absaugen von Matrat-
zen, Polstermöbeln und deren Fugen.
Fugendüse, 300 mm (SFD 10)
Extralange Fugendüse zum Aussaugen
von Falten, Fugen und Ecken.
Fugendüse, 560 mm (SFD 20)
Flexible Fugendüse zum Aussaugen
schwer zugänglicher Stellen.
Polsterdüse, 190 mm (SPD 10)
Breite Polsterdüse zum Absaugen von
Polstermöbeln, Matratzen und Kissen.
Comfort-Handgriff mit Beleuchtung
(SGC 20)
Zum Ausleuchten des Arbeitsbereiches.
Filter
Abluftfilter AirClean Plus 50
(SF-AP 50)
Zum effektiven Filtern für besonders
saubere Raumluft.
Abluftfilter Active AirClean 50
(SF-AA 50)
Zur deutlichen Reduzierung störender
Gerüche. Ideal für Haustierbesitzer und
Raucherhaushalte.
Abluftfilter HEPA AirClean 50
(SF-HA 50)
Zum effektiven Filtern von Feinstaub
und Allergenen. Ideal für Hausstauball-
ergiker.
Filtergitter
Wird benötigt, wenn Sie anstelle eines
Abluftfilters AirClean Plus 50,Active
AirClean 50oder HEPA AirClean 50
einen Abluftfilter AirClean einsetzen
möchten.
en - Contents
26
Warning and Safety instructions........................................................................ 27
Guide to the appliance........................................................................................ 32
Caring for the environment ................................................................................ 34
Notes on Delegated Regulation (EU) No. 665/2013 and 666/2013 .................. 35
Illustrations .......................................................................................................... 35
Preparing for use................................................................................................. 36
Use........................................................................................................................ 38
Setting down, transportation and storage ........................................................ 39
Maintenance ........................................................................................................ 40
Purchasing dustbags and filters............................................................................ 40
Dustbag change indicator .................................................................................... 41
Remove the dustbag ............................................................................................ 41
Fitting a dustbag .................................................................................................. 41
Replacing the motor protection filter .................................................................... 42
Replacing the exhaust filter................................................................................... 42
Replacing the AirClean filter................................................................................. 42
Replacing the AirClean Plus 50, Active AirClean 50 and HEPA AirClean 50 exhaust
filters ..................................................................................................................... 43
Replacing one type of exhaust filter with another ................................................ 43
Replacing the thread lifters .................................................................................. 43
Cleaning the roller on the AllTeQ floorhead .......................................................... 44
Cleaning and care ............................................................................................... 44
Problem solving guide ........................................................................................ 45
Service.................................................................................................................. 46
Contact in case of malfunction ............................................................................. 46
Warranty ................................................................................................................ 46
Optional accessories .......................................................................................... 46
Electrical connection for the UK........................................................................ 48
Electrical connection AU, NZ ............................................................................. 48
en - Warning and Safety instructions
27
This vacuum cleaner complies with current safety re-
quirements. Inappropriate use can, however, lead to per-
sonal injury and damage to property.
To avoid the risk of personal injury and damage to the
vacuum cleaner, please read these instructions carefully
before using it for the first time. They contain important
information on its safety, operation and maintenance.
Keep these instructions in a safe place and pass them on
to any future owner.
Always disconnect the vacuum cleaner from the mains
supply when you have finished using it, before changing
over accessories, as well as for maintenance work and
cleaning. Switch the vacuum cleaner off at the wall
socket and unplug it.
Correct application
This vacuum cleaner is intended for cleaning flooring in
domestic households and similar residential environments.
This vacuum cleaner can be used for all normal cleaning
of carpets, rugs and robust hard flooring.
This vacuum cleaner is not intended for outdoor use.
This vacuum cleaner is intended for use at altitudes of
up to 4000m above sea level.
The vacuum cleaner must only be used to vacuum dry
floor surfaces. Do not use on people and animals. Any
other usage, modification or alteration is not supported by
the manufacturer and could be dangerous.
en - Warning and Safety instructions
28
This vacuum cleaner can only be used by people with
reduced physical, sensory or mental capabilities, or lack of
experience or knowledge, if they are supervised whilst us-
ing it or have been shown how to use it in a safe way and
understand and recognise the consequences of incorrect
operation.
Safety with children
Danger of suffocation. Packaging, e.g. plastic wrap-
pings, must be kept out of the reach of babies and chil-
dren. Whilst playing, children could become entangled in
packaging or pull it over their head and suffocate.
Children under 8 years of age must be kept away from
the vacuum cleaner unless they are constantly supervised.
Children aged 8 and older may only use the vacuum
cleaner without supervision if they have been shown how
to use it in a safe manner. Children must be able to under-
stand and recognise the possible dangers caused by in-
correct operation.
Children must not be allowed to clean or maintain the
vacuum cleaner unsupervised.
Please supervise children in the vicinity of the vacuum
cleaner and do not let them play with it.
Technical safety
Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a dam-
aged appliance.
en - Warning and Safety instructions
29
Ensure that the connection data on the data plate of the
vacuum cleaner (voltage and frequency) match the mains
electricity supply exactly. The vacuum cleaner is suitable
for use with 50 Hz or 60 Hz without modification.
The mains electrical plug must be fitted with an appro-
priate fuse.
AUS/NZ: The mains electrical outlet must be fitted with
an appropriate circuit breaker.
Reliable and safe operation of this vacuum cleaner can
only be assured if it has been connected to the mains elec-
tricity supply.
While the vacuum cleaner is under warranty, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the warranty will be invalidated.
Do not pull or carry the vacuum cleaner by the cable,
and be careful not to damage the cable when withdrawing
the plug from the socket. Keep the cable away from sharp
edges and do not let it get squashed, for example, under a
door. Avoid running the vacuum cleaner over the cable.
This could damage the cable, plug or socket. The appli-
ance must not be used if any of these have suffered dam-
age.
Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced together with a
complete cable rewind. For safety reasons this must only
be done by Miele Service or a Miele authorised service
technician.
en - Warning and Safety instructions
30
When vacuuming, in particular fine dust, e.g. sawdust,
sand, plaster, flour, talcum powder etc., electrostatic
charges build up naturally. Under certain conditions these
charges will be released. To avoid the unpleasant effects of
these discharges, a metal inlay has been incorporated into
the underside of the handle. Please make sure that you
keep your hand in constant contact with this metal strip
during vacuuming.
Do not let the vacuum cleaner get wet. Clean only with a
dry cloth or slightly damp cloth when disconnected from
the mains supply.
Repairs should only be carried out by a Miele authorised
service technician. Repairs and other work by unqualified
persons can cause considerable danger to users.
Miele can only guarantee the safety of the appliance
when genuine original Miele replacement parts are used.
Faulty components must only be replaced by Miele spare
parts.
Correct use
To avoid the risk of damage, do not use the vacuum
cleaner without the dustbag, dust compartment filter and
exhaust filter in place.
The dust compartment cover will not close without a
dustbag fitted. Do not force it.
Do not vacuum up anything which has been burning or
is still glowing e.g. cigarettes, ashes or coal, whether glow-
ing or apparently extinguished.
en - Warning and Safety instructions
31
Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.
Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.
Do not vacuum up any inflammable or combustible li-
quids or gases and do not vacuum in areas where such
substances are stored.
Do not vacuum at head height and do not let the suction
get anywhere near a person's head.
Accessories
To avoid the risk of injury when vacuuming with a Miele
Turbobrush, do not touch the rotating roller brush.
It is not advisable to vacuum directly with the handle, i.e.
without an accessory attached as the rim could get dam-
aged and you could hurt yourself on sharp edges.
Only use genuine dustbags, filters and accessories with
the “ORIGINAL Miele” logo on them. Otherwise the manu-
facturer cannot guarantee the safety of the product.
Miele cannot be held liable for damage caused by incor-
rect use or operation or by non-compliance with these
Warning and Safety instructions.
en - Guide to the appliance
32
en - Guide to the appliance
33
a
Handle
b
Air inlet valve
c
Release buttons *
d
Connection piece for storage *
e
Telescopic suction tube *
f
EasyLock suction tube *
g
Telescopic suction tube release button *
h
Connection socket
i
Dust compartment lid release catch
j
Motor protection filter
k
Original Miele dustbag
l
Floorhead *
m
Carrying handle
n
Park System for storage (on both sides of the vacuum cleaner)
o
Original Miele exhaust filter *
p
Footswitch for automatic cable rewind
q
Mains cable
r
Rotary selector
s
Park System for pauses during vacuuming
t
On/Off footswitch
u
Release catch for accessories compartment
v
Dustbag change indicator
w
Suction hose
* these features depend on model and may vary or may not be available on your
vacuum cleaner.
en - Caring for the environment
34
Disposal of the packing mater-
ial
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufactur-
ing process and also reduces the
amount of waste in landfill sites.
Disposing of the dustbag and
filters
Dustbags and filters are made from en-
vironmentally friendly materials, and can
be disposed of with the normal house-
hold waste, as long as they have been
used exclusively for general household
dust.
Disposing of your old appli-
ance
Before disposing of your old appliance
remove the dustbag and filters and dis-
pose of them with your household
waste.
Electrical and electronic appliances of-
ten contain valuable materials. They
also contain specific materials, com-
pounds and components, which were
essential for their correct function and
safety. These could be hazardous to hu-
man health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local com-
munity waste collection / recycling
centre for electrical and electronic ap-
pliances, or contact your dealer or
Miele for advice. You are also respons-
ible (by law, depending on country) for
deleting any personal data that may be
stored on the appliance being disposed
of. Please ensure that your old appli-
ance poses no risk to children while be-
ing stored prior to disposal.
en
35
Notes on Delegated Regulation
(EU) No. 665/2013 and
666/2013
This vacuum cleaner is a domestic va-
cuum cleaner and is classified as a uni-
versal vacuum cleaner in accordance
with the above-mentioned regulations.
These operating instructions, the EU
data sheet and the online energy effi-
ciency label for this vacuum cleaner are
available to download from the Miele
website at www.miele.com.
The annual energy consumption stated
on the data sheet and on the energy ef-
ficiency label describes the indicative
annual energy consumption (kWh per
year), based on 50 cleaning cycles. Ac-
tual energy consumption depends on
how the vacuum cleaner is used.
All tests and calculations were carried
out according to the following harmon-
ised standards applicable at the time in
due consideration of the published reg-
ulation guidelines of the European
Commission from September 2014:
a) EN 60312-1 Vacuum cleaners for
household use - Part 1: Dry vacuum
cleaners - Methods for measuring the
performance.
b) EN 60704-2-1 Household and similar
electrical appliances - Test code for the
determination of airborne acoustical
noise - Part 2-1: Particular requirements
for vacuum cleaners.
c) EN 60335-2-2 Household and similar
electrical appliances - Safety - Part 2-2:
Particular requirements for vacuum
cleaner and water suction appliances.
Not all floorheads and accessories sup-
plied with the vacuum cleaner are inten-
ded for intensive cleaning of carpets or
hard floors as described in the regula-
tions. The following floorheads and set-
tings were used to determine the val-
ues:
For energy consumption and cleaning
class on carpet and hard floors and
sound power level on carpet the univer-
sal floorhead was used with the brush
retracted (press the footswitch). If
your vacuum cleaner is supplied as
standard with an SID Intensive floor-
head, this will have been used for de-
termining the values.
If your vacuum cleaner is supplied as
standard with the SRD hard floorbrush,
this is designed for intensive vacuuming
of hard floors with gaps and crevices
and will have been used to determine
the above values on hard floors.
The values on the EU data sheet and
the energy efficiency label refer exclus-
ively to the combinations and settings
of floorheads on the different floor sur-
faces described here.
Only original Miele dustbags, motor
protection filters and exhaust filters
were used for all measurements.
Illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating instruc-
tions.
en
36
Preparing for use
Attach the suction hose (dia. 01)
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
To detach the suction hose (dia. 02)
Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connect the suction hose to the
handle (dia. 03)
Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Your vacuum cleaner is fitted with one
of the following suction tubes, depend-
ing on model:
EasyLock suction tube
Telescopic suction tube
Comfort telescopic suction tube
To assemble the EasyLock tube
(dia. 04)
Hold the suction tube by the connec-
tion piece and push it into the second
suction tube, turning it clockwise or
anti-clockwise until it clicks into posi-
tion.
Slide the connection piece upwards
until it clicks into position.
Connect the handle to the suction
tube (dia. 05 + 06)
Insert the handle into the suction
tube until it clicks into position. To do
this, line up the guides on the two
pieces.
To detach the handle
To detach the handle from the suc-
tion tube, press the release button
and pull the handle out of the suction
tube, twisting it slightly as you do so.
Adjusting the telescopic suction tube
(dia. 07)
One part of the telescopic tube is
packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
Press the release button and adjust
the tube to the desired height.
Adjusting the Comfort telescopic
suction tube (dia. 07)
One part of the Comfort telescopic tube
is packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
Grasp the release mechanism and
adjust the telescopic suction tube to
the required length.
Connect the suction tube to the
floorhead (dia. 08)
Push the suction tube into the floor-
head and turn it clockwise or anti-
clockwise until it clicks into position.
en
37
To separate the suction tube from the
floorhead press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
To adjust the floorhead
(dia. 09, 10 + 11)
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard flooring.
Miele offer a range of other floorheads,
brushes and accessories for other types
of flooring and special requirements
(see “Optional accessories”).
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
Press the foot control.
This type of flooring can be briefly va-
cuumed with the brush retracted. Car-
pets and rugs should be vacuumed with
the brush retracted:
Press the foot control.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to manoeuvre (see “Use - To regulate
the suction power”).
Using the SID Intensive floorhead
(depending on model)
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
The SID floorhead is designed for brief
use on carpets, and for vacuum flooring
with deep gaps and crevices.
For continuous vacuuming we recom-
mend using the adjustable floorhead.
Activating the exhaust filter
TimeStrip® change indicator on the
exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
12).
a AirClean
b AirClean Plus 50 (light blue)
c Active AirClean 50 (black)
d HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with fil-
ter c or d, you need to activate the ex-
haust filter TimeStrip® change indic-
ator.
Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (dia. 13).
Remove the indicator strip (dia. 14).
Press the exhaust filter TimeStrip®
change indicator(dia. 15).
After approx. 10 - 15 seconds, a thin
red line will appear in the left hand side
of the display (dia. 16).
en
38
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the exhaust filter TimeStrip
works®
The exhaust filter TimeStrip® change
indicator shows the remaining func-
tional life of the exhaust filter. After ap-
prox. 50 operating hours the display will
be completely filled with red (dia. 17).
50 operating hours equates to approx-
imately one year of use.
Using the accessories supplied
(dia. 18)
Crevice nozzle
Dusting brush
Upholstery nozzle
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
AllergoTeQ floorhead
Turbobrush
These are supplied with their own oper-
ating instructions.
To open the accessories compart-
ment (dia. 19)
Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
Take out the accessory you require.
Press down firmly on the lid to close
it.
Adjustable floorhead (dia. 20)
The adjustable floorhead can also be
used for vacuuming the stairs.
For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.
Use
Unwinding the mains cable (dia. 21)
Pull the mains cable out to the re-
quired length.
Insert the plug into the socket.
If vacuuming for longer than 30
minutes, the cable must be pulled
out all the way. There is a risk of
overheating and damage.
To rewind the cable (dia. 22)
Switch off at the wall socket and re-
move the plug.
Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (dia. 23)
Press the On/Off foot control .
To regulate the suction power
(dia. 24)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
en
39
Curtains, fabric
Upholstery, cushions
Cut pile carpets, rugs and runners
Energy-saving vacuuming. This
setting is also very quiet
Loop pile carpet and rugs
Hard flooring and heavily soiled
carpets and rugs
When using the adjustable floorhead,
if the suction seems too high, reduce
the suction until the floorhead is
easier to manoeuvre.
Turn the suction power selector
manually to the suction power setting
you require.
To open the air inlet valve (dia. 25)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.
Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to man-
oeuvre. Close the valve when you are
ready to use full power again.
During vacuuming
When vacuuming, pull the cleaner be-
hind you on its wheels. You can stand
it upright for vacuuming stairs and
curtains etc.
When vacuuming, in particular
fine dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc., electro-
static charges build up naturally. Un-
der certain conditions these charges
will be released. To avoid the un-
pleasant effects of these discharges,
a metal inlay has been incorporated
into the underside of the handle.
Please make sure that you keep your
hand in constant contact with this
metal strip during vacuuming (dia.
26).
Setting down, transportation
and storage
Park System for pauses during vacu-
uming (dia. 27)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during brief pauses.
Slot the floorhead into the slot in the
parking attachment.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp,
- retract the telescopic suction tube
fully
- do not use the park system if your
vacuum cleaner has an EasyLock
suction tube.
Park System for storage (dia. 28 + 29)
Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Switch off
at the wall socket and withdraw the
plug.
en
40
If your vacuum cleaner has an Easy-
Lock suction tube you can separate
the two sections for storage purposes.
Press the release button on the lower
section and pull the top section out.
Push the connection piece attached
to the upper tube into the lower tube.
Stand the vacuum cleaner upright.
If your vacuum cleaner has a tele-
scopic suction tube, retract the tubes
fully so that it takes up less room for
storage.
Slot the floorhead downwards into
one of the parking attachments on
the side of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
Maintenance
Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
The Miele filtration system consists of
three components:
Original Miele dustbag (type GN)
Motor protection filter
Original Miele exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
We recommend only using genuine
dustbags, filters and accessories
with the “ORIGINAL Miele” logo on
them. This will ensure that the suc-
tion power of the vacuum cleaner is
maintained, giving the best possible
cleaning results.
Dustbags with the “ORIGINAL Miele”
logo on them are not made from pa-
per or paper-based materials and nor
do they have a cardboard collar. This
is why our dustbags are particularly
long-lasting and reliable.
Please note that appliance faults and
damage originating from the use of
accessories which do not carry the
“ORIGINAL Miele” logo will not be
covered by the appliance guarantee.
Purchasing dustbags and filters
Original Miele dustbags and filters are
available from the Miele webshop, the
Miele Spare Parts Department and your
Miele dealer.
Original Miele dustbags and filters are
identified by the “ORIGINAL Miele” logo
on the packaging.
Every packet of original Miele dustbags
contains four dustbags, one AirClean
exhaust filter and one motor protection
filter. Original Miele multipacks contain
16 dustbags, four AirClean exhaust fil-
ters and four motor protection filters
(available depending on country).
en
41
Original Miele exhaust filters can also
be purchased separately from Miele or
your Miele dealer. Please quote the
model number of your vacuum cleaner
when ordering to make sure you get the
correct filter. You can also order all ac-
cessories via the Miele webshop.
Dustbag change indicator (dia. 30)
Change the dustbag when the colour
marker in the dustbag change indicator
turns red, or sooner if it is no longer ef-
fective (see possible reasons for this
below).
Miele dustbags are intended to be
used only once. Dispose of the dust-
bag when it is full. Do not attempt to
re-use. Blocked pores reduce the
suction power of the vacuum
cleaner.
To check the dustbag change indic-
ator
Attach the standard adjustable floor-
head to the vacuum cleaner.
Switch the vacuum cleaner on and
select the highest power setting.
Lift the floorhead off the floor a little.
How the dustbag change indicator
works
The dustbag change indicator is set for
normal household dust. This generally
contains a mixture of dust, hair,
threads, carpet fluff, grit etc.
However, if the cleaner has been used
to vacuum up fine dust, such as plaster,
brick dust, cement or flour, the pores of
the dustbag will become blocked very
quickly.
This affects the air permeability of the
bag, and the marker will indicate that
the bag is “full” even when it is not. The
dustbag must be replaced if this is the
case.
If, on the other hand, a large amount of
hair and carpet fluff which typically con-
tains a lot of air is vacuumed up, the in-
dicator may fail to react even though
the bag is full. You should still change it.
Both these extremes can occur.
Remove the dustbag (dia. 31)
Press the release catches at the side
of the hose connector, and lift the
hose from the socket (dia. 02).
Lift the release catch for the dust
compartment lid and raise the lid as
far as it will go (dia. 13).
The dustbag has a flap which closes
automatically when the dust compart-
ment lid is raised to prevent any dust
escaping.
Pull the dustbag out by the grip on
the collar.
Fitting a dustbag (dia. 32)
Fit the new dustbag into the holder as
far as it will go. Leave the dustbag
folded up when you take it out of the
box.
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
A safety device prevents the lid clos-
ing without a dustbag in place. Do
not force it!
en
42
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces (dia. 01).
Replacing the motor protection filter
(dia. 33)
Replace the motor protection filter
whenever you start a new packet of
dustbags.
Every packet of original Miele dustbags
contains a motor protection filter. Mul-
tipacks contain four motor protection
filters (available depending on country).
Open the dust compartment lid.
Pull the dustbag out by the grip on
the collar.
Lift up the filter frame until it clicks
and remove the old filter. Hold by the
clean, unsoiled section to remove it.
Replace with a new motor protection
filter.
Close the filter frame.
Fit the dustbag into the holder as far
as it will go.
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
Replacing the exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
12).
a AirClean
Replace this filter every time you start a
new packet of Miele dustbags. Every
packet of original Miele dustbags con-
tains one AirClean exhaust filter. Mul-
tipacks contain four AirClean filters
(available depending on country).
bAirClean Plus 50 (light blue)
Replace this filter after approx. one
year. Make a note of the date on the fil-
ter.
cActive AirClean 50 (black)
dHEPA AirClean 50 (white)
Replace this filter when the exhaust fil-
ter TimeStrip® change indicator is
completely red (dia. 17). The indicator
lights up after approximately 50 hours
of operation, which is equivalent to
about a year of average use. You can
continue vacuuming when the light
comes on. However, the suction power
will be reduced as will the effectiveness
of the filter if it is not replaced in good
time.
Replacing the AirClean
filter(dia. 34 + 35)
Do not use more than one exhaust fil-
ter at a time.
Open the dust compartment lid.
Press the release catch on the filter
grille and open the grille as far as it
will go.
Grasp the used AirClean filter by one
of the clean, unsoiled sections and
take it out.
Replace it with a new AirClean ex-
haust filter.
en
43
If you wish to fit anAirClean
Plus50,Active AirClean 50 or an
HEPA AirClean 50 filter, see “Repla-
cing one type of exhaust filter with
another”.
Close the filter grille.
Close the dust compartment lid.
Replacing the AirClean Plus 50,
Active AirClean 50 and
HEPA AirClean 50 exhaust filters
(dia. 36 + 37)
Do not use more than one exhaust fil-
ter at a time.
Open the dust compartment lid.
Lift the exhaust filter and remove it.
Insert a new exhaust filter, making it
sure it goes in properly, then press it
down into position.
If you are using exhaust filter c or d,
press the exhaust filter TimeStrip®
change indicator (dia. 15).
After approx. 10 - 15 seconds, a thin
red line will appear in the left hand side
of the display (dia. 16).
If you wish to fit anAirClean filter,
see “Replacing one type of exhaust
filter with another”.
Close the dust compartment lid.
Replacing one type of exhaust filter
with another (dia. 12)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b AirClean Plus 50 (light blue)
c Active AirClean 50 (black)
d HEPA AirClean 50 (white)
Do not use more than one exhaust fil-
ter at a time.
When changing the filter, please note
1. If you wish to replace exhaust filter a
with filter b, c or d, it is essential that
you remove the filter grille before you
fit the new exhaust filter.
If you are using exhaust filter c or d,
you must also activate the exhaust
filter TimeStrip® change indicator
(dia. 15).
2. If you wish to replace exhaust filter b,
c or d with filter a it is essential that
this filter is fitted in the filter grille *
(dia. 35).
* Filter grille - see “Optional ac-
cessories”
Replacing the thread lifters
(dia. 38 + 39)
(not possible on EcoTeQ Plus floor-
heads)
The thread lifters on the suction inlet to
the floorhead can be replaced. Replace
the thread lifters if the pile has worn
down.
Lever the thread lifters from the slots.
To do so use a suitable tool, e.g. a flat
blade screwdriver.
Fit new thread lifters.
en
44
Cleaning the roller on the AllTeQ
floorhead (dia. 40)
Clean the roller on the floorhead if re-
quired.
Release the bearing (with bayonet fit-
ting) using a coin.
Press the bearing out, and remove.
Remove the roller.
Remove any threads and hair, replace
the roller and refit the bearing, locking
it back into position.
Replacement parts are available from
your Miele dealer or from the Miele
Spare Parts Dept.
Cleaning and care
Always disconnect the vacuum
cleaner from the electrical supply be-
fore cleaning it. Switch off at the wall
socket and unplug it.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a propri-
etary cleaner suitable for plastic.
Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners or oil-based condi-
tioning agents!
Dust compartment
The dust compartment can, if neces-
sary, be cleaned using a dry duster,
brush or, if available, a second vacuum
cleaner to vacuum the dust out.
Do not let the vacuum cleaner
get wet! If moisture gets into the va-
cuum cleaner, there is a risk of elec-
tric shock.
en
45
Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
The vacuum cleaner
switches off automatic-
ally.
A temperature limiter switches the vacuum cleaner off
automatically if it gets too hot.
This can occur if, for instance, large articles block the
suction tube or when the dustbag is full or contains
particles of fine dust. A heavily soiled exhaust or dust
compartment filter can also be the cause of overheat-
ing.
Switch the vacuum cleaner off immediately using
the On/Off foot control . Switch off at the wall
socket and unplug it.
After removing the cause, wait for approximately 20 -
30 minutes to allow the vacuum cleaner to cool down.
It can then be switched on again.
en
46
Service
Contact in case of malfunction
In the event of any faults which you
cannot remedy yourself, please contact
your Miele Dealer or Miele Service.
Contact information for Miele Service
can be found at the end of this docu-
ment.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.
Warranty
For information on the appliance war-
ranty specific to your country, please
contact Miele. See back cover for ad-
dress.
In the UK, your appliance warranty is
valid for 2 years from the date of pur-
chase. However, you must activate your
cover by calling 0330 160 6640 or re-
gistering online at www.miele.co.uk.
Optional accessories
Certain models are supplied as stand-
ard with one or more of the following
accessories.
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
These and many other products can be
ordered from the Miele webshop, the
Miele Spare Parts Dept. or your Miele
dealer.
Floorheads / brushes
AllergoTeQ floorhead (SBDH 285-3)
This floorhead is suitable for daily hy-
gienic cleaning of all floor surfaces. The
level of cleanliness of the floor shows in
a colour “traffic light” display when va-
cuuming.
Turbobrush TurboTeQ (STB 305-3) /
Turbobrush Turbo (STB 205-3)
This brush is ideal for removing fluff and
hair from short-pile carpet.
Hard floorbrush (SBB 235-3)
This brush is designed for use on hard
flooring such as tiled or stone floors.
Hard floor Twister floorbrush with
swivel action (SBB 300-3)
This brush is suitable for a variety of
hard floor surfaces and has a swivel
joint enabling it to get into awkward
corners.
Parquet Twister floorbrush with
swivel action (SBB 300-3)
(only available in selected countries)
With natural bristles for vacuuming
smooth hard floors and small gaps.
Parquet Twister XL floorbrush with
swivel action (SBB 400-3)
(only available in selected countries)
With natural bristles for quickly vacu-
uming smooth hard floors and small
gaps.
en
47
Other accessories
MicroSet (SMC 20)
This set is specially designed for clean-
ing small objects and difficult to reach
areas (such as PC keyboards, stereo
equipment, intricately carved furniture
and ornaments, models etc).
Flexible Mini Turbobrush XS
(STB 20) / Turbo Mini (STB 101)
For vacuuming upholstery, mattresses
or car seats, etc.
Universal brush (SUB 20)
(only available in selected countries)
For dusting books, shelves, etc.
Radiator brush (SHB 30)
For dusting radiators, narrow shelves
and crevices.
Mattress nozzle (SMD 10)
For vacuuming upholstery, mattresses,
cushions, curtains, covers etc.
Crevice nozzle, 300 mm (SFD 10)
Extra long crevice nozzle for cleaning in
folds, crevices and corners.
Crevice nozzle, 560 mm (SFD 20)
Flexible crevice nozzle for vacuuming
hard to reach places.
Upholstery nozzle, 190 mm (SPD 10)
Extra wide upholstery nozzle for clean-
ing upholstered furniture, mattresses
and pillows.
Comfort handle with lighting
(SGC 20)
Lights up the area being vacuumed.
Filters
AirClean Plus 50 exhaust filter
(SF-AP 50)
Effective filtration for particularly clean
room air.
Active AirClean 50 exhaust filter
(SF-AA 50)
For a significant reduction of unpleasant
odours. Ideal for households with pets
or smokers
HEPA AirClean 50 exhaust filter
(SF-HA 50)
Effectively filters fine dust and allergens.
Ideal for people allergic to house dust.
Filter grille
The filter grille is required if you wish to
use an AirClean exhaust filter instead of
an AirClean Plus 50 exhaust filter, an
Active AirClean 50 exhaust fillter or a
HEPA AirClean 50 exhaust filter.
en
48
Electrical connection for
the UK
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations (BS
7671 in the UK). The voltage and fre-
quency are given on the data plate loc-
ated underneath the vacuum cleaner.
Please ensure that these match the
household mains supply. The fuse rat-
ing is quoted on the plug. The appli-
ance is supplied with a cable and moul-
ded plug ready for connection to a
230-240 V/50 Hz a.c. single phase sup-
ply.
Non-rewireable plugs BS 1363
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em-
bossed in words on the base of the
plug, (as applicable to the design of
plug fitted). Replacement fuses should
be ASTA approved to BS1362 and have
the correct rating. Replacement fuses
and fuse covers may be purchased
from your local electrical supplier.
Electrical connection AU,
NZ
All work should be carried out by a suit-
ably qualified and competent person in
strict accordance with national and
local safety regulations. The voltage
and rated load are given on the data
plate located underneath the vacuum
cleaner. Please ensure that these match
the household mains supply. The appli-
ance is supplied with a cable and moul-
ded plug ready for connection to a
230V/50Hz AC single phase supply.
Test Marks Electrical safety
RCM Mark
Electrically sup-
pressed
according to
AS/NZS CISPR
14.1
fr - Table des matières
49
Consignes de sécurité et mises en garde......................................................... 50
Description de l'appareil..................................................................................... 56
Votre contribution à la protection de l'environnement .................................... 58
Notes sur les directives européennes 665/2013 (UE) et 666/2013 (UE).......... 59
Références des croquis...................................................................................... 60
Avant utilisation ................................................................................................... 60
Utilisation des accessoires fournis ................................................................... 62
Utilisation ............................................................................................................. 62
Transport et rangement ...................................................................................... 63
Maintenance ........................................................................................................ 64
Commande pour sacs à poussière et filtres.......................................................... 65
Jauge de remplacement du sac à poussière ....................................................... 65
Retirer le sac à poussière ..................................................................................... 65
Mise en place du sac à poussière........................................................................ 66
Remplacer le filtre de protection moteur.............................................................. 66
Date de remplacement du sac à poussière........................................................... 66
Remplacer le filtre d'évacuation AirClean ............................................................ 67
Remplacer le filtre d'évacuation AirClean Plus 50, Active AirClean 50 et
HEPA AirClean 50 ................................................................................................. 67
Changer le type de filtre d'évacuation ................................................................. 67
Remplacer les ramasse-fils .................................................................................. 68
Nettoyage des roulettes de la brosse AllTeQ ....................................................... 68
Entretien............................................................................................................... 68
En cas d'anomalie ............................................................................................... 69
Service après-vente ............................................................................................ 70
Contact en cas d'anomalies.................................................................................. 70
Garantie................................................................................................................. 70
Accessoires en option ........................................................................................ 70
fr - Consignes de sécurité et mises en garde
50
Cet aspirateur répond aux réglementations de sécurité
en vigueur. Toute utilisation non conforme peut entraîner
des dommages corporels et matériels.
Lisez attentivement ce mode d'emploi avant d'utiliser
l'aspirateur pour la première fois. Il contient des informa-
tions importantes sur la sécurité, l'utilisation et l'entretien
de votre aspirateur. Vous vous protégerez et éviterez tout
dommage.
Conservez ce mode d'emploi et veuillez le remettre en
cas de cession de cet appareil.
Eteignez toujours l'aspirateur après utilisation, avant de le
nettoyer ou si vous souhaitez procéder à une opération
de maintenance ou changer un accessoire. Débranchez
l'aspirateur de la prise murale.
Utilisation conforme
Cet aspirateur est destiné à une utilisation à la maison
ou de type domestique.
Cet aspirateur est conçu pour l'aspiration quotidienne
des tapis, moquettes et sols durs peu fragiles.
Cet aspirateur ne doit pas être utilisé en extérieur.
Cet aspirateur est conçu pour une utilisation jusqu'à
4000m d'altitude au-dessus du niveau de la mer.
fr - Consignes de sécurité et mises en garde
51
N'utilisez l'aspirateur que dans le cadre domestique,
pour aspirer des poussières sèches. N'utilisez pas cet as-
pirateur sur les hommes et les animaux. Toute autre appli-
cation, adaptation ou modification de l'aspirateur est inter-
dite.
Les personnes qui ne sont pas en mesure d'utiliser l'as-
pirateur en toute sécurité en raison de déficiences phy-
siques, sensorielles ou mentales, de leur inexpérience ou
de leur ignorance ne doivent pas l'utiliser sans la sur-
veillance ou les instructions d'une personne responsable.
Précautions à prendre avec les enfants
Risque d'asphyxie! Les enfants se mettent en danger en
s'enveloppant dans les matériaux d'emballage (film plas-
tique, par exemple) ou en glissant leur tête à l'intérieur. Te-
nez les matériaux d'emballage hors de portée des enfants.
Tenez les enfants de moins de huit ans éloignés de l'ap-
pareil à moins qu'ils ne soient sous étroite surveillance.
Les enfants à partir de huit ans sont autorisés à utiliser
l'aspirateur sans surveillance uniquement si vous leur avez
expliqué comment l'utiliser sans danger. Les enfants
doivent être en mesure d'appréhender et de comprendre
les risques encourus en cas de mauvaise manipulation.
Les enfants ne doivent pas nettoyer ou intervenir sur
l'appareil sans être sous la surveillance d'un adulte.
Surveillez les enfants lorsqu'ils jouent à proximité de
l'aspirateur. Ne laissez jamais les enfants jouer avec l'aspi-
rateur.
fr - Consignes de sécurité et mises en garde
52
Sécurité technique
Avant toute utilisation, vérifiez que l'aspirateur ou les ac-
cessoires ne présentent aucun dommage apparent. N'allu-
mez et n'utilisez jamais un aspirateur endommagé.
Comparez les données de raccordement indiquées sur
la plaque signalétique de l'appareil (tension et fréquence)
avec celles du réseau. Ces données doivent absolument
coïncider. L'aspirateur est conçu sans modification pour
des réseaux de 50Hz ou 60Hz.
La prise électrique doit être protégée par un fusible 10A
ou 16A.
Seul un raccordement de l'aspirateur au réseau élec-
trique public permet de garantir un fonctionnement sûr et
fiable de ce dernier.
Pendant la période de garantie, seul un service après-
vente agréé par le fabricant est habilité à réparer l'aspira-
teur, faute de quoi tout bénéfice de la garantie est perdu en
cas de panne ultérieure.
Ne vous servez pas du câble d'alimentation pour porter
l'aspirateur et ne tirez pas sur le câble pour débrancher la
prise. Ne tirez pas le câble sur des arêtes vives et ne le
coincez pas sous une porte! Evitez de rouler trop souvent
sur le câble. Le câble, la fiche et la prise risqueraient d'être
endommagés et de vous mettre en danger.
fr - Consignes de sécurité et mises en garde
53
N'utilisez pas l'aspirateur lorsque le câble d'alimentation
est endommagé. Ne faites remplacer un câble endomma-
gé que par un câble d'origine. Pour des raisons de sécu-
rité, seul un professionnel agréé par Miele ou le service
après-vente Miele doit se charger de l'échange.
Lorsque vous aspirez des poussières fines telles que la
sciure ou le sable, des décharges électrostatiques peuvent
se produire dans certaines circonstances. Pour éviter de
tels désagréments, cet aspirateur est équipé d'une bande
métallique comme dispositif de dérivation au bas de la poi-
gnée. Laissez votre main dessus pendant que vous aspi-
rez.
Ne plongez jamais l'aspirateur dans l'eau. Nettoyez-le
avec un chiffon sec ou légèrement humide.
Les réparations ne doivent être effectuées que par des
techniciens Miele agréés. Les réparations non conformes
peuvent entraîner de graves dangers pour l’utilisateur.
Les pièces de rechange d'origine sont les seules dont
Miele garantit qu'elles remplissent les conditions de sécu-
rité. Ne remplacez les pièces défectueuses que par des
pièces détachées d'origine.
Précautions d'utilisation
N'utilisez pas l'aspirateur sans sac à poussière, sans
filtre moteur et sans filtre d'évacuation !
Vous ne pouvez pas fermer le couvercle de l'aspirateur
si vous n'avez pas inséré de sac à poussière. Ne forcez
pas.
fr - Consignes de sécurité et mises en garde
54
Cet aspirateur est un appareil domestique. N'aspirez pas
de plâtre, d'enduit, de sciure, de poussières de ponçage ni
de sable fin. N’aspirez pas non plus de farine en grande
quantité. En s’agglomérant, ces éléments risquent d’ob-
struer les pores du sac et d’endommager le moteur.
N'aspirez pas d'objets incandescents comme les
cendres, le charbon qui semblent éteints.
N'aspirez pas de liquides ou d'éléments humides! Lais-
sez sécher complètement les tapis et moquettes sham-
pouinés avant de les aspirer.
N'aspirez pas de toner ! Le toner utilisé pour les impri-
mantes et les photocopieurs peut être conducteur.
N'aspirez pas de produits ni de gaz inflammables ou ex-
plosifs. N'utilisez pas l'aspirateur dans des locaux dans
lesquels sont stockés ces produits.
Lorsque vous aspirez avec le tube télescopique, évitez
de l'approcher de votre tête.
Accessoires
N'introduisez pas vos doigts dans l'électrobrosse ou la
turbobrosse quand celles-ci sont en marche !
Lorsque vous passez l'aspirateur avec la poignée pour
flexible sans accessoire, veillez à ne pas l'abîmer.
N'utilisez que des sacs à poussière, des filtres et des
accessoires portant le logo «ORIGINAL Miele». Le fabri-
cant ne peut garantir votre sécurité que dans ces condi-
tions.
fr - Consignes de sécurité et mises en garde
55
Miele ne peut pas être tenu pour responsable pour les
dommages qui résulteraient d'une mauvaise utilisation et
qui iraient à l'encontre des consignes de sécurité.
fr - Description de l'appareil
56
Votre contribution à la protection de l'environnement
58
Nos emballages
Nos emballages protègent votre appa-
reil des dommages pouvant survenir
pendant le transport. Nous les sélec-
tionnons en fonction de critères écolo-
giques permettant d'en faciliter le recy-
clage.
En participant au recyclage de vos em-
ballages, vous contribuez à économiser
les matières premières et à réduire le
volume des déchets. Votre revendeur
reprend vos emballages.
Elimination des sacs à
poussière et des filtres
Les sacs à poussière et les filtres sont
composés de matériaux écologiques.
Vous pouvez jeter les filtres avec les or-
dures ménagères. Ceci est valable éga-
lement pour le sac à poussière, à condi-
tion qu'il ne contienne aucun détritus
interdit dans les ordures ménagères.
Votre ancien appareil
Avant de mettre l'appareil au rebut, reti-
rez le sac à poussière et les filtres, et je-
tez-les avec les ordures ménagères.
Les appareils électrique et électro-
niques contiennent souvent des maté-
riaux précieux. Cependant, ils
contiennent aussi des substances
toxiques nécessaires au bon fonction-
nement et à la sécurité des appareils. Si
vous déposez ces appareils usagés
avec vos ordures ménagères ou les ma-
nipulez de manière inadéquate, vous
risquez de nuire à votre santé et à l'en-
vironnement. Ne jetez jamais vos an-
ciens appareils avec vos ordures ména-
gères!
Faites appel au service d'enlèvement
mis en place par votre commune, votre
revendeur ou Miele, ou rapportez votre
appareil dans un point de collecte spé-
cialement dédié à l'élimination de ce
type d'appareil. Vous êtes légalement
responsable de la suppression des
éventuelles données à caractère per-
sonnel figurant sur l'ancien appareil à
éliminer. Jusqu'à son enlèvement,
veillez à ce que votre ancien appareil ne
présente aucun danger pour les en-
fants.
fr
66
Appuyez sur la touche de verrouillage
et relevez le couvercle jusqu'au clic
(croquis 13).
La fermeture «hygiène» du sac à pous-
sière se ferme automatiquement de fa-
çon à éviter toute émission de parti-
cules fines.
Sortez le sac de son logement en le
tenant par la poignée.
Mise en place du sac à
poussière(croquis 32)
Placez le nouveau sac à poussière et
enfoncez-le jusqu'à la butée dans le
logement. Laissez-le plié tel qu'il sort
de l'emballage.
Refermez le couvercle du comparti-
ment à poussière jusqu'au clic en fai-
sant attention à ne pas coincer le sac.
Un verrouillage spécial permet d'évi-
ter que le couvercle du comparti-
ment à poussière puisse être fermé
s'il ne contient pas de sac. Ne jamais
forcer!
Pour insérer le flexible dans l'ouver-
ture d'aspiration, superposez les
deux marques de guidage et enfon-
cez-le jusqu'à ce que vous entendiez
un clic. Superposez les deux mar-
ques de guidage pour vous ai-
der(croquis 01).
Remplacer le filtre de protection
moteur(croquis 33)
Remplacez le filtre de protection mo-
teur, dès que vous ouvrez une nouvelle
pochette de sacs à poussière.
Chaque paquet de sacs à poussières
d'origine Miele contient un filtre moteur
et les packs XXL en contiennent 4.
Ouvrez le compartiment à poussière.
Sortez le sac de son logement en le
tenant par la poignée.
Ouvrez la grille de filtre et retirez le
filtre moteur usagé en le saisissant
par la surface hygiène propre.
Insérez le nouveau filtre.
Refermez la grille de filtre.
Placez le nouveau sac à poussière et
enfoncez-le jusqu'à la butée.
Refermez le couvercle du comparti-
ment à poussière jusqu'au clic en fai-
sant attention à ne pas coincer le sac.
Date de remplacement du sac à
poussière
Différents filtres d’évacuation sont insé-
rés dans l'aspirateur suivant les mo-
dèles (croquis 12).
a AirClean
Remplacez le filtre d'évacuation, dès
que vous ouvrez une nouvelle pochette
de sacs à poussière Miele. Chaque pa-
quet de sacs à poussières d'origine
Miele contient un filtre d’évacua-
tionAirClean, chaque pack XXL
contient 4 filtres d’évacuationAirClean.
bAirClean Plus 50 (bleu clair)
Remplacez le filtre d'évacuation au bout
d'un an env. Notez la date de remplace-
ment sur le filtre d'évacuation.
cActive AirClean 50 (noir)
dHEPA AirClean 50 (blanc)
Remplacez toujours le filtre d'évacua-
tion quand la diode de changement du
filtre d'évacuation timestrip® devient
rouge (croquis 17). Le témoin s'allume
après environ 50 heures de fonctionne-
ment, ce qui correspond à une utilisa-
fr
67
tion moyenne pendant un an. Vous pou-
vez continuer à aspirer, mais l'efficacité
d'aspiration et de filtrage est moindre.
Remplacer le filtre d'évacuation
AirClean (croquis 34 + 35)
Attention à ne mettre qu'un seul filtre
d'évacuation!
Ouvrez le compartiment à poussière.
Comprimez le déverrouillage de la
grille de filtre et ouvrez la grille de
filtre jusqu'à ce qu'elle se bloque.
Retirez le filtre d'évacuation AirClean
usagé par le coin carré «hygiène».
Insérez le nouveau filtre AirClean.
Si vous souhaitez mettre en place un
filtre d'évacuation AirClean Plus50,
Active AirClean50 ou HEPA
AirClean50, reportez vous au cha-
pitre «Changer le type de filtre
d'évacuation».
Refermez la grille de filtre.
Fermez le compartiment à poussière.
Remplacer le filtre d'évacuation
AirClean Plus 50, Active AirClean 50
et HEPA AirClean 50 (croquis 36 + 37)
Attention à ne mettre qu'un seul filtre
d'évacuation!
Ouvrez le compartiment à poussière.
Soulevez le filtre d'évacuation et sor-
tez-le.
Insérez le nouveau filtre d'évacuation
et enfoncez-le bien.
Appuyez lors de l'utilisation d'un filtre
d'évacuation c ou d sur le témoin de
remplacement du filtre d'évacuation
timestrip®(croquis 15).
Au bout de 10 à 15 secondes, une ban-
delette rouge apparaît à gauche de l'in-
dicateur(croquis 16).
Si vous souhaitez mettre en place un
filtre d'évacuation AirClean, reportez
vous au chapitre «Changer le type
de filtre d'évacuation».
Fermez le compartiment à poussière.
Changer le type de filtre d'évacuation
(croquis 12)
Différents filtres d’évacuation sont insé-
rés dans l'aspirateur suivant les mo-
dèles.
a AirClean
b AirClean Plus 50 (bleu clair)
c Active AirClean 50 (noir)
d HEPA AirClean 50 (blanc)
Attention à ne mettre qu'un seul filtre
d'évacuation!
Conseils en cas de changement du
type de filtre
1. Si vous souhaitez remplacer un filtre
d'évacuation a par le filtre b, c ou d,
vous devez démonter la grille du filtre
avant de poser le nouveau filtre
d'évacuation.
Lors de l'utilisation d'un filtre d'éva-
cuation c ou d, vous devez égale-
ment activer le témoin de saturation
du filtre d'évacuation timestrip® (cro-
quis 15).
fr
68
2. Si vous souhaitez utiliser un filtre a
au lieu du filtre b, c ou d, vous devez
obligatoirement remonter une grille
de filtre* (croquis 35).
* Grille de filtre - voir chapitre «Ac-
cessoires en option»
Remplacer les ramasse-fils
(croquis 38 + 39)
(pas possible pour les modèles avec
brosse EcoTeQ Plus)
Les ramasse-fils au niveau de la fente
d'aspiration de la brosse peuvent être
remplacés. Remplacez les ramasse-fils
lorsque le velours est usé.
Dégagez les ramasse-fils des fentes.
Utilisez pour ce faire un tournevis
pour vis à fente.
Remplacez les ramasse-fils par de
nouveaux.
Nettoyage des roulettes de la brosse
AllTeQ (croquis 40)
Nettoyer si nécessaire les roulettes de
la brosse.
Déverrouillez l'axe de la roulette à
l'aide d'une pièce de monnaie.
Retirez l'axe de la roulette.
Retirez la roulette.
Enlevez les fils et les cheveux, repla-
cez la roulette et verrouillez l'axe de la
roulette.
Vous pouvez vous procurer les pièces
de rechange chez votre revendeur ou
auprès du SAV Miele.
Entretien
Mettez l'aspirateur hors tension
avant tout nettoyage et débranchez
l'appareil.
Aspirateur et accessoires
Nettoyez l’aspirateur et tous les acces-
soires en plastique avec un nettoyant
pour plastique classique, vendu dans le
commerce.
N'utilisez jamais de produit abra-
sif, à vitres, multi-usages ou conte-
nant des corps gras!
Compartiment à poussière
Si vous disposez d’un deuxième aspira-
teur, aspirez l’intérieur du compartiment
à poussière ou nettoyez-le simplement
avec un chiffon sec ou un pinceau.
Ne plongez jamais l'aspirateur
dans l'eau. La présence d'humidité
dans l'appareil peut provoquer des
décharges électriques.
fr
69
En cas d'anomalie
Vous pouvez régler la plupart des défauts ou anomalies courants par vous-même.
Dans bon nombre de cas, vous économiserez ainsi du temps et de l'argent car
vous n'aurez pas besoin de faire appel au service après-vente.
Les tableaux suivants vous aideront à déceler la cause d'un défaut ou d'une ano-
malie et à y remédier.
Problème Cause et solution
L’aspirateur s’arrête
brusquement.
Un limiteur de température arrête l’aspirateur lors-
qu’un échauffement anormal du moteur se produit.
Ce problème peut notamment survenir lorsqu'un ob-
jet obstrue le tuyau d'aspiration ou lorsque le sac à
poussière est plein ou rempli de poussières fines qui
ne laissent pas passer l'air ou lorsque le filtre de pro-
tection moteur ou le filtre d'évacuation est fortement
encrassé.
Mettez l'aspirateur hors tension à l'aide de la
touche Marche/Arrêt et débranchez l'appareil.
Après élimination de la cause du problème, attendez
env. 20 - 30minutes que l'aspirateur ait suffisamment
refroidi avant de le remettre en marche.
fr
70
Service après-vente
Contact en cas d'anomalies
Vous n'arrivez pas à résoudre la panne
par vous même? Contactez le service
après-vente Miele ou votre revendeur
Miele.
Les numéros de téléphone du service
après-vente Miele figurent en fin de
notice.
Garantie
La garantie est accordée pour cet ap-
pareil selon les modalités de vente par
le revendeur ou par Miele pour une pé-
riode de 24 mois.
Pour plus d'informations reportez-vous
aux conditions de garantie fournies au-
près du service après-vente Miele.
Accessoires en option
Certains modèles sont équipés en sé-
rie avec l'un ou plusieurs des acces-
soires suivants:
Veuillez vous conformer aux conseils
de nettoyage et d’entretien du fabri-
cant du revêtement de sol.
Vous pouvez commander ces articles et
bien d'autres encore via la boutique en
ligne Miele (www.miele-shop.com), au-
près du service après-vente ou en vous
adressant à votre revendeur Miele.
Brosses / Suceurs
Brosse AllergoTeQ (SBDH 285-3)
Pour le nettoyage quotidien de tous les
revêtements de sol. Lors de l'aspiration,
le degré de propreté est indiqué par un
affichage chromatique (tricolore).
Turbobrosse TurboTeQ (STB 305-3) /
Turbobrosse Turbo (STB 205-3)
Pour aspirer cheveux, peluches et poils
d'animaux des tapis ou moquettes à
poil court.
Brosse Hardfloor (SBB 235-3)
Spécialement conçue pour aspirer sur
les sols durs et peu fragiles comme les
carrelages.
Brosse Parquet Twister (SBB 300-3)
pour sols durs
Pour nettoyer les grandes surfaces fra-
giles et recoins difficiles d'accès.
Brosse Parquet Twister multidirec-
tionnelle (SBB 300-3)
Brosse en poils naturels pour nettoyer
les grandes surfaces fragiles et recoins
difficiles d'accès.
Brosse Parquet Twister XL
(SBB 400-3)
Avec une brosse naturelle, pour un net-
toyage rapide des grandes surfaces
avec sols durs et recoins difficiles d'ac-
cès.
Autres accessoires
Mallette d'accessoires (SMC 20)
Pour nettoyer les petits objets et les
zones difficiles d'accès (chaîne stéréo,
claviers, maquettes etc.)
fr
71
Mini turbobrosse XS (STB 20)/ Mini
turbobrosse (STB 101)
Pour nettoyer les coussins, matelas ou
sièges de voiture.
Brosse universelle (SUB 20)
Pour dépoussiérer les livres, étagères,
etc.
Brosse pour radiateurs et interstices
(SHB 30)
Pour dépoussiérer les éléments des ra-
diateurs, les étagères étroites ou les
plinthes.
Suceur plat pour matelas (SMD 10)
Pour nettoyer confortablement les ma-
telas et canapés jusque dans les re-
coins.
Suceur plat extra long 300 mm
(SFD10)
Suceur long pour nettoyer plis, plinthes
et coins.
Suceur plat extra long 560 mm
(SFD20)
Suceur long flexible pour aspirer les
zones difficiles d'accès.
Suceur à coussins 190 mm (SPD 10)
Pour aspirer les coussins, matelas, etc.
Poignée Confort avec fonctionSpot-
light (SGC 20)
Pour éclairer la surface à aspirer.
Filtres
Filtre d'évacuation AirClean Plus 50
(SF-AP 50)
Pour une filtration efficace qui assainit
l'air.
Filtre à évacuation Active AirClean 50
(SF-AA 50)
Réduction significative des mauvaises
odeurs. Convient particulièrement aux
propriétaires d'animaux domestiques et
aux fumeurs.
Filtre d'évacuation HEPA AirClean 50
(SF-HA 50)
Filtre même les poussières fines et les
substances allergènes. Idéal pour les
personnes allergiques aux poussières
domestiques.
Grille de filtre
Nécessaire lorsque vous souhaitez rem-
placer un filtre d'évacuation AirClean
par un filtre AirClean Plus 50, un filtre
Active AirClean50 ou par un filtre HEPA
AirClean50.
it - Indice
72
Istruzioni di sicurezza e avvertenze................................................................... 73
Descrizione apparecchio.................................................................................... 78
Il Vostro contributo alla tutela dell'ambiente.................................................... 80
Indicazioni sui regolamenti europei (UE) nr. 665/2013 e 666/2013 .................81
Nota relativa alle immagini ................................................................................. 81
Prima dell'uso ...................................................................................................... 82
Uso degli accessori in dotazione ...................................................................... 84
Uso........................................................................................................................ 84
Sospendere il lavoro, trasportare l'aspirapolvere e riporlo............................. 85
Manutenzione ...................................................................................................... 86
Fonti di riferimento per sacchetti polvere e filtri .................................................... 86
Spia sostituzione sacchetto ................................................................................. 86
Rimuovere il sacchetto polvere ............................................................................ 87
Inserire il sacchetto polvere .................................................................................. 87
Sostituire il filtro motore ....................................................................................... 87
Sostituzione del filtro aria in uscita........................................................................ 88
Sostituire il filtro aria in uscita AirClean ................................................................ 88
Sostituire il filtro aria in uscita AirClean Plus 50, Active AirClean 50 e
HEPA AirClean 50 ................................................................................................. 88
Cambiare filtro aria in uscita ................................................................................. 89
Sostituire gli alzafili ............................................................................................... 89
Pulire le rotelle della bocchetta AllTeQ.................................................................. 89
Pulizia / Manutenzione........................................................................................ 89
Guasti, cosa fare... .............................................................................................. 91
Assistenza tecnica .............................................................................................. 92
Contatti in caso di guasto ..................................................................................... 92
Garanzia ................................................................................................................ 92
Accessori su richiesta......................................................................................... 92
it - Istruzioni di sicurezza e avvertenze
74
Utilizzare l'aspirapolvere per aspirare esclusivamente
oggetti asciutti. Non passare l'aspirapolvere su persone né
su animali. Non è ammesso impiegarlo in altro modo o ap-
portare qualsivoglia modifica all'aspirapolvere.
Le persone che per le loro capacità fisiche, sensoriali o
psichiche o per la loro inesperienza o non conoscenza non
siano in grado di utilizzare in sicurezza l'aspirapolvere, non
devono farne uso senza la sorveglianza e la guida di una
persona responsabile.
Bambini
Pericolo di soffocamento! I bambini potrebbero per gio-
co avvolgersi nel materiale di imballaggio (ad es. nella pelli-
cola) o avvolgervi la testa e soffocare. Tenere lontano dai
bambini il materiale d'imballaggio.
Tenere lontano dall'aspirapolvere i bambini al di sotto
degli otto anni oppure sorvegliarli costantemente.
I ragazzini più grandi e responsabili (in ogni caso non al
di sotto degli otto anni) possono utilizzare l'apparecchio
senza sorveglianza solo ed esclusivamente se è stato loro
spiegato come farlo e se sono in grado di farlo in tutta si-
curezza. È importante che sappiano riconoscere e com-
prendere quali pericoli possono derivare da un uso non
corretto dell'apparecchio.
In ogni caso non permettere loro di effettuare operazioni
di pulizia e manutenzione senza sorveglianza.
Sorvegliare i bambini che si trovano nelle immediate vi-
cinanze dell'apparecchio. Non permettere loro di giocarci.
it - Istruzioni di sicurezza e avvertenze
75
Sicurezza tecnica
Prima di mettere in funzione l’apparecchio controllare
che non vi siano danni visibili esternamente né sull'aspira-
polvere né sugli accessori; non mettere in funzione un
aspirapolvere danneggiato.
Confrontare i valori di allacciamento (tensione e frequen-
za) riportati sulla targhetta dati dell'aspirapolvere con quelli
dell'impianto elettrico. Questi dati devono assolutamente
corrispondere. L'aspirapolvere non modificato è adatto a
funzionare a 50 Hz o 60 Hz.
La presa elettrica deve essere protetta da un fusibile da
16 A oppure da 10 A ad azione ritardata.
Il funzionamento sicuro e affidabile dell'aspirapolvere è
garantito solo se l'elettrodomestico è allacciato alla rete
elettrica pubblica.
Eventuali riparazioni all'aspirapolvere in garanzia devono
essere effettuate esclusivamente dall'assistenza tecnica
autorizzata Miele, altrimenti il diritto alla garanzia per qual-
siasi eventuale ulteriore danno decade.
Non tirare il cavo per spostare l'aspirapolvere e non sfi-
lare la spina dalla presa tirando il cavo. Non passare il cavo
su spigoli appuntiti e non schiacciarlo ad es. sotto le porte.
Evitare di passare continuamente sul cavo con l'aspirapol-
vere. Tutte queste operazioni possono danneggiare il cavo,
la spina e la presa e mettere a rischio la sicurezza.
it - Istruzioni di sicurezza e avvertenze
76
Se il cavo di alimentazione è danneggiato, non mettere
in funzione l'aspirapolvere. Un cavo di alimentazione dan-
neggiato deve essere sostituito per intero, tamburo com-
preso. Per motivi di sicurezza è necessario che la sostitu-
zione sia effettuata dal servizio di assistenza tecnica auto-
rizzato Miele.
Se si aspira polvere fine come polvere di trapanatura,
sabbia, gesso, farina ecc. si possono generare delle picco-
le cariche elettrostatiche. Per evitare gli sgradevoli effetti
delle scariche elettrostatiche, è stato applicato un inserto
metallico dietro l'impugnatura. Quando si passa l'aspira-
polvere, tenere la mano sempre a contatto con questo in-
serto.
Non immergere mai per nessun motivo l'aspirapolvere in
acqua; pulirlo solamente con un panno asciutto oppure so-
lo leggermente inumidito.
Eventuali riparazioni devono essere effettuate esclusiva-
mente da un tecnico del servizio di assistenza autorizzato
Miele. Se le riparazioni non sono state effettuate corretta-
mente, queste possono mettere seriamente in pericolo la
sicurezza dell'utente.
Sostituire eventuali pezzi guasti o difettosi esclusiva-
mente con ricambi originali Miele; solo così Miele può ga-
rantire il pieno rispetto degli standard di sicurezza.
Impiego corretto
Non mettere mai in funzione l'aspirapolvere senza sac-
chetto, filtro motore e filtro aria in uscita.
it - Istruzioni di sicurezza e avvertenze
77
Se il sacchetto polvere non è inserito, il coperchio del
vano sacchetto non può essere chiuso. Non forzare!
Non aspirare oggetti ardenti o incandescenti, come siga-
rette, cenere o carbone apparentemente spenti.
Non aspirare con l'aspirapolvere liquidi e sporco bagna-
to. Prima di passare l’aspirapolvere su moquette e/o tap-
peti lavati o inumiditi, aspettare che siano completamente
asciutti.
Non aspirare la polvere di toner. Il toner, ad es. delle
stampanti o delle fotocopiatrici, può condurre elettricità.
Non aspirare sostanze facilmente infiammabili o esplosi-
ve, né gas; non passare l’aspirapolvere nemmeno in locali
dove tali sostanze sono depositate.
Non aspirare all'altezza della testa delle persone.
Accessori
Se è in azione la turbospazzola Miele, non avvicinare le
mani al rullo in movimento.
Se si usa l'impugnatura libera, senza tubo né accessori,
controllare che non sia danneggiata.
Utilizzare solo sacchetti, filtri e accessori con il logo ori-
ginale Miele. Solo in questo caso la casa produttrice può
garantirne la sicurezza.
Miele non risponde per i danni causati da un uso diverso
da quello previsto, da impostazioni sbagliate dell'appa-
recchio e dall'inosservanza delle istruzioni per la sicurez-
za e delle avvertenze.
it - Descrizione apparecchio
78
it
90
Aspirapolvere e accessori
Le parti e gli accessori in plastica
dell'aspirapolvere possono essere puliti
con un apposito prodotto per plastica,
reperibile in commercio.
Non utilizzare mai prodotti abra-
sivi, pulitori per vetro o multiuso e
detergenti contenenti oli.
Vano polvere
Pulire il vano polvere con un secondo
aspirapolvere o con un panno asciutto
o un pennello per la polvere.
Non immergere mai l'aspirapol-
vere in acqua. Se l'umidità penetra
nell'aspirapolvere c'è pericolo di
scossa elettrica.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele Complete C2 PowerLine - SFRF3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele Complete C2 PowerLine - SFRF3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info